Additional Images

Warrior 3515 Front Bumper Skid Plate Toyota FJ Cruiser

Brand: Warrior
Part Number: 3515
Part Description: Warrior 3515 Front Bumper Skid Plate Toyota FJ Cruiser
Color/Finish: Black Powder Coat
Shipping: Free Shipping!
Was: $85.00
Sale: $75.00
Save: 12%
Save: $10.00
Free Shipping!


How to install your Warrior Skid Plate

  • 1. Locate and remove the two bolts that affix the front edge of the factory skidplate to the front cross member. You may reuse these bolts or use the hardware provided with the Warrior skidplate.
  • 2. Set the Warrior skidplate into place with the bumper side edge set inside the front bumper. Loosely thread the hardware through both the bumper and the skidplate. Note: On some early versions of the Warrior front bumper there may be some clearance issues with the two outermost mounting holes and the bumpers’ inner winch plate support structure. Utilizing a cut-off tool to cut the two outmost 8mm x 20mm screws shorter will alleviate this issue.
  • 3. Push the skidplate into place so that the two lower mounting tabs set inside of the depressions in the front edge of the factory skidplate. Thread the remaining hardware into these two slots utilizing the _ flat washers. If the slots in the skidplate do not line up with the holes in the front cross member, check to make sure the front bumper is centered on the frame mount studs. Make any necessary adjustments then tighten all bolts.
  • 4. The installation of your FJC Warrior Front Bumper Skidplate is now finished.


  • 3515
  • 3515
  • Warrior
  • New

Shipping Information

  • Item Requires Shipping
  • Free Shipping!
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.