BumperSuperstore.com » 2007, Ford, F-350

If you use a Ford F-250 or F-350 for work, its likely youre well-familiar with the term "the right tool for the job". The new Addictive Desert Designs HoneyBadger rear bumper for the F-250 and F-350 gives those words new meaning: it literally doubles as a lockable Toolbox. That means no more reaching into the truck bed toolbox, fishing around for what you need; keep the tools you use most close at hand, right in the rear bumper. The HoneyBadger is available for the 1999-2016 Ford F-250 & F-350 Super Duty. Features include: Factory Replacement, .120 Tube Construction, Rear Facing Light Mounts, Lockable Tool Boxes, Optional Back-Up Sensor Cut-Outs, and more without interfering with the factory hitch.

Features

• Lockable storage space
• Cube light mounts

Specifications

• Position: Rear
• Bumper Type: Heavy Duty
• Bumper Color: Hammer Black
• Panel Color: Satin Black
• Material: Steel
• Step Included: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: Yes

Vehicle Fitment 

Technical Files 

Installation Instructions

Ford F250/350 stealth side steps are designed to fit the super duty (4 door) trucks. This design follows the stealth look. With different color options and lighting options this will set you apart from other F250/350 owners.

Features

• Fits crew cab
• Laser cut panels, tabs and plates for a precise fit
• Direct fit - no cutting or welding required
• Stainless steel hardware
• White LED strip mount

Specifications

• Color: Hammer Black
• Panel Color: Satin Black
• Material: Steel
• Series: Rock Slider

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess front winch bumpers for the 2005-2007 Ford Super Duty truck will hold a large winch and come with integrated tow hooks. Wet and salty environments can wreak havoc on steel bumpers and make them rust out in no time. Aluminum doesn't rust, so you can be sure that your Aluminess off road bumper will hold up even in salty environments. The lighter weight of aluminum also prolongs the life of your brakes, tires, suspension, and steering when compared to steel bumpers. Despite it being light weight, it is still very strong. Aluminess bumpers have survived collisions with deer, bear, and elk. The front winch bumper for the 2005-2007 Ford Super Duty truck was designed specifically for the vehicle to match all of the body lines. This off road bumper looks as good as it functions.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess front winch bumpers for the 2005-2007 Ford Super Duty truck will hold a large winch and come with integrated tow hooks. Wet and salty environments can wreak havoc on steel bumpers and make them rust out in no time. Aluminum doesn't rust, so you can be sure that your Aluminess off road bumper will hold up even in salty environments. The lighter weight of aluminum also prolongs the life of your brakes, tires, suspension, and steering when compared to steel bumpers. Despite it being light weight, it is still very strong. Aluminess bumpers have survived collisions with deer, bear, and elk. The front winch bumper for the 2005-2007 Ford Super Duty truck was designed specifically for the vehicle to match all of the body lines. This off road bumper looks as good as it functions.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess Bike Rack Swing Arm is designed to replace the existing box arm on your Aluminess rear bumper. The bike rack swing arm is able to hold 2 bikes and swing open with your Aluminess Box. The swing arm is designed to clear tires up to 35" in diameter and is available for most of existing rear bumpers. The swing arm is capable of holding 100 pounds on the upper platform and 100 pounds on the lower platform. Aluminess recommends the swing arm be installed with 1-UP USA bike rack trays. They are available for purchase from Aluminess with necessary hardware for easy installation. Other bike rack trays may work with platform, but have not been tested. Therefore, no warranty is available with other bike rack mounts.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Bike Rack Swing Arm Weight Limit: 200 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Heavy Duty Pipe rear bumpers are built around a 4" schedule 20 steel pipe with 14 Gauge diamond plate steel skin. Design highlights include standard rear backup lights, backup sensor compatible and the ability to use any ball mount with your factory receiver hitch. A Heavy Duty Pipe rear bumper completes your truck without interfering with towing capabilities. The stable rear bumper design adds extra protection on or off road.

Features

• No drill installation
• Tough powder coat smooth finish for corrosion resistance
• 14 Gauge diamond plate steel skin
• 1/4" thick steel adjustable frame mounting brackets
• 2 backup lights and 2 tag lights included
• Flush mount to factory receiver hitch for use with any ball mount
• Backup sensor ready
• Mounting brackets and hardware included

Specifications

• Position: Rear
• Bumper Type: Heavy Duty
• Finish: Tough Powder Coat
• Material: Steel
• D-Rings Mount: No
• Step Included: Yes
• Sensor Cutouts: Yes

Vehicle Fitment 

Technical Files 

Installation Instructions

Cowboy rear bumpers are built with 14 Gauge diamond plate steel. Design highlights include standard rear backup lights, backup sensor compatible and the ability to use any ball mount with your factory receiver hitch. A Cowboy rear bumper completes your truck without interfering with towing capabilities. The stable rear bumper design adds extra protection on or off road.

Features

• No drill installation
• Tough powder coat smooth finish for corrosion resistance
• 14 Gauge diamond plate steel skin
• 1/4" thick steel adjustable frame mounting brackets
• 2 backup lights and 2 tag lights included
• Flush mount to factory receiver hitch for use with any ball mount
• Backup sensor ready
• Mounting brackets and hardware included

Specifications

• Position: Rear
• Bumper Type: Heavy Duty
• Finish: Tough Powder Coat
• Material: Steel
• D-Rings Mount: No
• Step Included: Yes
• Sensor Cutouts: Yes

Vehicle Fitment 

Technical Files 

Installation Instructions

The automatic, electric-powered running board that instantly extends when you open your door, and retracts out of sight when the doors close for improved ground clearance, aerodynamics and appearance. Its sleek design, all-weather performance and legendary reliability set the industry standard. PowerStep has die-cast aluminum alloy components and precision stainless steel pivot pins for rock-solid stability.

Features

• Automatically deploys and retracts to make getting in and out of your vehicle safer and easier
• Low-profile integrated LED light system
• Step anodized and PTFE coated military spec finish that resist corrosion and wear and tear
• Minor cutting required on super and regular cab
• Suitable for regular cab, crew cab, super cab
• Backed by a 5 year/60,000 mile warranty

Specifications

• Color/Finish: Textured Black Powder Coat
• Material: Aluminum
• Shape: Flat Board

Vehicle Fitment 

Technical Files 

Installation Instructions

Videos 

Go ahead and step on it. Bedstep is a real time saver. Not to mention knee and back saver. Strong and rugged, this non-slip, retractable bumper step quickly flips down with the nudge of a foot providing a faster, easier and safer way to load or unload your pickup's cargo. Supports up to 300 lb Frame mounts under the rear bumper so it works even with an open tailgate or when towing.

Features

• Engineered to support loads up to 300 lb
• Self lubricating bushings for all-weather performance
• High-strength aluminum alloy components
• Precision stainless-steel pivot pins for rock-solid stability
• 3-year/36,000 mile warranty

Specifications

• Position: Rear
• Color: Black
• Material: Aluminum

Vehicle Fitment 

Technical Files 

Installation Instructions

Videos 

Manufactured from steel for ultimate strength and powder coated for durability, the deluxe bumper is designed to complement the vehicle's style and safety systems while offering a solid platform to mount essential 4×4 accessories in a seamless and integrated package.

Features

• Durable steel construction for maximum protection
• Cover straps attached to the uprights ensure there are no exposed edges
• Continuous uprights through the bumper section of the bar strengthens the outer frame
• Vehicle specific design to complement the F350 and maximize functionality
• Recessed indicators
• Provision to accommodate a range of IPF driving lights
• Retains original equipment tow points
• Two aerial brackets located in the frame of the bar
• Finished in a hard-wearing powder coat with the added option of color coding to individual vehicles
• Superbly engineered mounting system secures to chassis via high tensile bolts

Specifications

• Position: Front
• Bumper Type: Heavy Duty
• Color/Finish: Black Powder Coat
• Material: Steel
• D-Rings Mount: Yes
• Winch Compatible: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Designed with utmost care and attention to detail this top-notch product by B&W Trailer Hitches ensures safety and years of reliable service. It is made from rigid materials using the latest in technology to provide impeccable quality. When you are on the road, this 'made in America' product will give you the safety and durability you need.

Features

• Solid, machined 2 5/16" ball
• Durable powder coat finish
• Only a 4" hole in the bed
• Bolts to existing holes in the frame with no drilling or welding
• Solid, one-piece machined receiver socket
• Flexible latch pin handle attached to a spring loaded, 5/8" steel locking pin that goes completely through the ball
• Limited lifetime warranty
• Ford 1999-2010 3/4 and 1 ton super duty long and short bed trucks
• Ford F450 2008-2010 with factory installed bed

Kit Includes

• GNRM1108 weighing 56 lb
• GNRC800 weighing 40 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

The weight carrying capacity is 16000 lb, while the tongue weight is 1600 lb and the receiver tube opening Size is 2". Designed with utmost care and attention to detail this top-notch product by B&W trailer hitches ensures safety and years of reliable service. It is made from rigid materials using the latest in technology to provide impeccable quality. When you are on the road, this 'made in America' product will give you the safety and durability you need.

Features

• 3 piece interlocking design
• Six point frame mount
• Grade 8 mounting hardware
• Boxed for product protection and easier shipping
• Steel gusset with safety chain openings
• Corrosion resistant
• Class 5 rating
• This product is a one box hitch weighing 73 lb
• Ford F250/F350 1999-2010 3/4 and 1 ton trucks with factory bumper (18" spare)
• Ford F450 2008-2010 (factory installed bed and bumper)

Specifications

• Color/Finish: Gloss Black Powder Coat
• Material: Steel
• Receiver Tube Size: 2"

Vehicle Fitment 

Technical Files 

Installation Instructions

Custom installation kit for 5th wheel hitches that use universal mounting rails in your truck bed. Custom installation brackets provide a no drill alternative to install mounting rails in the bed of your truck.

Features

• Bolt on application
• Sturdy steel construction
• 2 base rails, custom brackets, and hardware included

Specifications

• Material: Steel

Vehicle Fitment 

Technical Files 

Installation Instructions

These quick fit fifth wheel custom mounting brackets are application specific and line up with existing holes in the truck frame to provide a better fit and quicker installation than universal brackets.

Features

• Bolt on application
• Sturdy steel construction

Specifications

• Material: Steel
• Drilling Required: Yes
• Installation Type: Bolt on

Vehicle Fitment 

Technical Files 

Installation Instructions

Body Armor 4x4 leveling kits are the ideal way to easily enhance the look of your vehicle. Economical kits create the perfect look by adding additional clearance to fit up to 35" tires and wider wheels for 2 and 4 wheel drive vehicles. Each leveling kit is engineered to retain a factory ride and is backed by our armor guard warranty.

Features

• Fits up to 35" tires
• Bolt on installation
• Stock ride quality
• Quickly return to stock
• Fits larger wheels and tires
• Durable powder coat finish
• Armor guard warranty

Specifications

• Position: Front
• Color: Black
• Material: Steel
• Front Lift Height: 2.5"
• Max Tire Size: 35"

Vehicle Fitment 

Technical Files 

Installation Instructions

Body Armor 4x4 leveling kits are the ideal way to easily enhance the look of your vehicle. Economical kits create the perfect look by adding additional clearance to fit up to 35" tires and wider wheels for 2 and 4 wheel drive vehicles. Each leveling kit is engineered to retain a factory ride and is backed by our armor guard warranty.

Features

• Fits up to 35" tires
• Bolt on installation
• Stock ride quality
• Quickly return to stock
• Fits larger wheels and tires
• Durable powder coat finish
• Armor guard warranty

Specifications

• Position: Front
• Color: Black
• Material: Steel
• Front Lift Height: 2.0"
• Max Tire Size: 35"

Vehicle Fitment 

Technical Files 

Installation Instructions

The Chassis Unlimited octane series Light bar style front bumper ships to your door ready to install on your truck, complete with the 3-stage texture black powder coat. Non-winch bumper features room for a 30" curved or straight dual row light bar, HD 1" thick recovery points and mounts up to 4 LED cube lights in the outer wings of the bumper. The octane series bumpers bring an entire new style to the bumper market and offer an industry first low-profile fitment with aggressive styling. The octane series is designed as a 3 piece modular bumper, the outer bumper wings bolt to the center core section of the bumper. This modular design allows us to offer an extreme tight contour of the vehicle, as well as a product design and extreme strength that will last a lifetime.

This bumper also includes two center section lighting options for the bumper you can either choose to install a 30" curved or straight dual row LED light bar or install eight 3" LED cube lights. Both light mounting options are included in the bumper and the choice is yours which look you prefer to use. There is also two 3" cube lights in each wing of the bumper, totaling four cube lights in the front bumper. Simple bolt on installation, no welding or grinding is needed to install octane series bumpers. Most installations are completed in a few hours or less with basic hand tools; the bumpers directly bolt on to your vehicle. Remove your factory bumper/mounts and product directly bolts onto your vehicles factory bumper mounting locations.

Features

• Manufactured from 3/16" USA steel
• Light mounting brackets for 30" curved/straight dual row LED Light bar, or Eight 3" LED cube lights
• Each side of the bumper has mounting brackets in the outer wing for two 3" LED cube lights (4 total)
• Includes heavy duty CNC machined 1" thick recovery points with a 1" bore
• Designed and manufactured in California
• Bumpers ships complete with 3-stage black texture powder coat
• Lights sold separately

Specifications

• Product Line: Octane
• Position: Front
• Bumper Type: Heavy Duty
• Color/Finish: Texture Black Powder Coat
• Material: Steel
• D-Rings Mount: No
• Winch Compatible: No
• Sensor Cutouts: No

Vehicle Fitment 

Chassis Unlimited octane series rear bumper ships to your door ready to install, complete with 3-stage texture black powder coat. The octane series bumpers bring an entire new style to the bumper market and offer an industry first low-profile fitment with aggressive styling. The octane series rear bumper is designed as a one-piece bumper and ships as one unit ready to bolt to your vehicle. The rear bumpers also feature corner steps as well as a built-in center step for ease of access.

Simple bolt on installation, no welding or grinding is needed to install octane series bumpers. Most installations are completed in a few hours or less with basic hand tools; the bumpers directly bolt on to your vehicle. Remove your factory bumper/mounts and product directly bolts onto your vehicles factory bumper mounting locations.

Features

• Manufactured from 3/16" USA Steel
• Includes LED license plate lights
• Recessed rear facing mounts for 3" LED cube lights as back up lights (2)
• Each side of the bumper has integrated corner steps
• Includes heavy duty CNC machined 1" thick recovery points with a 1" bore
• Designed and manufactured in California
• Bumpers ships complete with 3-stage texture black powder coat finish
• LED lights sold separately

Specifications

• Product Line: Octane
• Position: Rear
• Bumper Type: Heavy Duty
• Color/Finish: Texture Black Powder Coat
• Material: Steel
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Chassis unlimited octane series rear bumper ships to your door ready to install, complete with 3-stage texture black powder coat. The octane series bumpers bring an entire new style to the bumper market and offer an industry first low-profile fitment with aggressive styling. The octane series rear bumper is designed as a one-piece bumper and ships as one unit ready to bolt to your vehicle. The rear bumpers also feature corner steps as well as a built-in center step for ease of access.

Simple bolt on installation, no welding or grinding is needed to install octane series bumpers. Most installations are completed in a few hours or less with basic hand tools; the bumpers directly bolt on to your vehicle. Remove your factory bumper/mounts and product directly bolts onto your vehicles factory bumper mounting locations.

Features

• Factory parking sensors work excellent with bumpers
• Manufactured from 3/16" USA steel
• Includes LED license plate lights
• Recessed rear facing mounts for 3" LED cube lights as back up lights (2)
• Each side of the bumper has integrated corner steps
• Includes heavy duty CNC machined 1" thick recovery points with a 1" bore
• Designed and manufactured in California
• Bumpers ships complete with 3-stage texture black powder coat finish
• LED lights sold separately

Specifications

• Product Line: Octane
• Position: Rear
• Bumper Type: Heavy Duty
• Color/Finish: Texture Black Powder Coat
• Material: Steel
• D-Rings Mount: Yes
• Sensor Cutouts: Yes

Vehicle Fitment 

Truck bumpers are a modular 3-piece design made with high tensile strength 3/16" steel and reinforced with 1/4" steel in key areas which allows them to accommodate up to a 12,500 lbs winch. We also use a 2 step powder coating process. First the bumper is coated with a thick layer of a proprietary compound for corrosion resistance, then we coat the bumper with our textured black, UV resistant, scratch resistant powder coating. The result is a bumper that will look good and perform well for the lifetime of the vehicle.

Features

• Modular 3-piece design
• Joining pieces are reinforced and gusseted for added stability
• 1/4" and 3/16" steel construction
• 2 stage powder coat finish
• Accommodates up to a 12,500 lbs winch
• DV8 no hassle warranty
• Accepts four 3.5" round LED lights (not included)

Specifications

• Position: Front
• Bumper Type: Heavy Duty
• Color/Finish: Textured Black Powder Coat
• Material: Steel
• D-Rings Mount: Yes
• Winch Compatible: Yes
• Sensor Cutouts: No
• Width: 77"
• Height: 19"
• Depth: 27"
• Weight: 178 lb

Vehicle Fitment 

These truck bumpers are built with abuse in mind. DV8 bumpers are tested and proven in the desert, heavy off road recovery, and utility. DV8 bumpers are made from 3/16 cold rolled steel with 1/4 inch plus gusseting and mounting points. Every DV8 truck bumper comes with exclusive wrinkled 20 step powder coat. This finish looks great, is extremely durable, and is highly UV resistant. DV8 bumpers are 100 percent bolt on and include 2 year warranty against manufacturer defects. Our rear bumpers come with 7/8 inch D-ring shackles, will work with your factory hitch receiver, and have holes for LED lighting.

Features

• Accepts Two 3.5" round LED lights (not included)
• Perfect to enhance your vehicles style and functionality
• Built tough to with stand the harshest off-road conditions
• Premium grade materials for long-lasting service life
• Designed to allow for simple and easy installation

Specifications

• Position: Rear
• Bumper Type: Heavy Duty
• Color/Finish: Textured Black Powder Coat
• Material: Steel
• Step Included: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No
• Width: 76"
• Depth: 10"
• Height: 18"
• Weight: 108 lb

Vehicle Fitment 

The Fab Fours Ford Super Duty premium winch bumper focuses on strength and durability. This bumper is designed to be the ultimate in functionally-stylish front end protection while also providing more tire clearance to eliminate rubbing.

Features

• Provides far more tire clearance
• Winch ready - Accepts up to 16,500 lb. winches or smaller
• 1" D-Ring mounts
• 2-piece mounting system with adjustability to allow a "custom" fit
• Fab Fours signature injection molded light housings
• Fab Fours 90mm fog and 60mm turn indicator lights are included free with the bumper
• All sensor testing is done on lifted trucks
• Relocation bracket needed to run adaptive cruise control for 2017-2019 super duty
• The F350 with the high-performance towing capability will require the F450-F550 front replacement

Specifications

• Position: Front
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 3/16" US Steel
• Guard Included: No
• Winch Compatible: Yes
• Sensor Cutouts: Yes
• D-Rings Mount: Yes
• Weight: 225 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

The Fab Fours Ford Super Duty premium winch bumper focuses on strength and durability. This bumper is designed to be the ultimate in functionally-stylish front end protection while also providing more tire clearance to eliminate rubbing.

Features

• Provides far more tire clearance
• Winch ready - Accepts up to 16,500 lb. winches or smaller
• 1" D-Ring mounts
• 2-piece mounting system with adjustability to allow a "custom" fit
• Fab Fours signature injection molded light housings
• Fab Fours 90mm fog and 60mm turn indicator lights are included free with the bumper
• All sensor testing is done on lifted trucks
• Relocation bracket needed to run adaptive cruise control for 2017-2019 super duty
• The F350 with the high-performance towing capability will require the F450-F550 front replacement

Specifications

• Position: Front
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 3/16" US Steel
• Guard Included: Yes
• Winch Compatible: Yes
• Sensor Cutouts: Yes
• D-Rings Mount: Yes
• Weight: 225 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Building on our reputation for the highest quality and design in the Truck & Jeep market, the Fab Fours Winch Mount focuses on strength and durability. This one piece fully welded Winch Mount is easy to install; it simply slips it through the factory tow hooks slots straight to the frame.

Features

• One piece winch mount
• Fully welded
• Slips through the factory tow hook slots straight to the frame
• Small Frame holds winches 12,000 lb or smaller
• Large Frame holds winches 16,500 lb or smaller
• Full Guard Winch Mount holds winches 16,500 lb or smaller
• Accommodates factory 360 camera

Specifications

• Position: Front
• Color/Finish: 2 Stage Black Powder Coat
• Material: 3/16" US Steel
• Weight: 175 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

The Fab Fours Red Steel Front Bumper focuses on strength, practicality, and affordability. Key features include winch-ready design, integrated shackle mounts, side mounting slots for lighting options, and the best value in the industry. Give your truck the front end protection it needs at a price you can afford with Red Steel.

Features

• Aggressive design
• Winch ready- will hold up to 16.5K winch (depends on vehicle)
• Perfectly follows the body lines
• Side mounting slots and tabs for various light options (lights not included)
• Provides far more tire clearance
• Integrated shackle mounts

Specifications

• Position: Front
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 11 Gauge Steel/Winch Tray 1/4" Plate Steel
• Winch Compatible: Yes
• Sensor Cutouts: No
• D-Rings Mount: Yes
• Weight: 130 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

For the Ford Super Duty we took the ranch bumper and gave it unique styling and design. We matched every bumper to the body lines of each model truck. With no vertical flanges and tapered edges.

Features

• Ranch style bumper with diamond tread plate
• Optional- winch tray
• Optional- ranch 2" receiver
• Optional- bolt on D-ring mounts
• Optional- high flow lower guard
• Optional- light lower guard
• Replacement front lower guard vertical plate
• Relocation option available for adaptive cruise control
• Accommodates factory 360 camera

Specifications

• Bumper Style: Ranch
• Position: Front
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 14 Gauge US Steel
• Winch Compatible: Optional
• Sensor Cutouts: No
• D-Rings Mount: Optional
• Tow Hooks: Yes
• Weight: 175 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

For the Ford Super Duty we took the ranch bumper and gave it unique styling and design. We matched every bumper to the body lines of each model truck. With no vertical flanges and tapered edges.

Features

• Ranch style bumper with diamond tread plate
• Optional- winch tray
• Optional- ranch 2" receiver
• Optional- bolt on D-ring mounts
• Optional- high flow lower guard
• Optional- light lower guard
• Replacement front lower guard vertical plate
• Relocation option available for adaptive cruise control
• Accommodates factory 360 camera

Specifications

• Bumper Style: Ranch
• Position: Front
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 14 Gauge US Steel
• Winch Compatible: Optional
• Sensor Cutouts: No
• D-Rings Mount: Optional
• Tow Hooks: Yes
• Weight: 175 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

For the Ford Super Duty we took the ranch bumper and gave it unique styling and design. We matched every bumper to the body lines of each model truck. With no vertical flanges and tapered edges.

Features

• Ranch style bumper with diamond tread plate
• Optional- winch tray
• Optional- ranch 2" receiver
• Optional- bolt on D-ring mounts
• Optional- high flow lower guard
• Optional- light lower guard
• Replacement front lower guard vertical plate
• Relocation option available for adaptive cruise control
• Accommodates factory 360 camera

Specifications

• Bumper Style: Ranch
• Position: Front
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 14 Gauge US Steel
• Winch Compatible: Optional
• Sensor Cutouts: No
• D-Rings Mount: Optional
• Tow Hooks: Yes
• Weight: 175 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

The Fab Fours Vengeance Series rear replacement sensor bumper combines superior strength and styling to give your vehicle that extra cool factor. Constructed out of 11 Gauge US Steel here in south Carolina.

Features

• Two front-side openings allow light options (4) 3"X3" Dually lights or (2) 6" light bars (lights are not included)
• 11 Gauge US Steel construction
• Sensor compatible
• Retain OEM receiver hitch and wiring locations
• Sensors optimized for vehicles with suspension lifts stock height trucks may require tuning the sensor mount and will require special care

Specifications

• Position: Rear
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 11 Gauge US Steel
• Step Included: Yes
• Sensor Cutouts: Yes
• D-Rings Mount: Yes
• Weight: 65 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Ranch style rear replacement bumper that integrates the existing receiver hitch. Fab Fours Inc., More than Expected, Better than Expected.

Features

• Blends safety, dependability, and style
• Retain OEM receiver hitch and wiring locations
• Made with diamond plate steel for impeccable strength and style

Specifications

• Bumper Style: Ranch
• Position: Rear
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 14 Gauge US Steel
• Step Included: Yes
• Sensor Cutouts: Yes
• D-Rings Mount: No
• Weight: 85 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

For the Ford Super Duty we took the ranch bumper design and combined it with the smooth plate look from our premium line to create Black Steel Elite. Pipe and formed steel along with premium powder coat give the Elite bumpers a unique look.

Features

• Ranch style bumper with smooth matte black finish
• Sensor compatible when needed
• Retain OEM receiver hitch and wiring locations

Specifications

• Bumper Style: Ranch
• Position: Rear
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 12 Gauge US Steel
• Step Included: Yes
• Sensor Cutouts: Yes
• D-Rings Mount: No
• Weight: 85 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

The Fab Fours Ford Super Duty rear replacement bumper integrates the existing receiver hitch. In addition to added style and formed-steel durability, the vehicle gains lower steps and recovery points. Designed to be the ultimate in functionally-stylish rear-end protection.

Features

• Integrated steps on either side of the tailgate
• Durable formed steel construction
• Retain OEM receiver hitch and wiring locations
• 3/4" D-Ring recovery points

Specifications

• Position: Rear
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 3/16" US steel
• Step Included: Yes
• Sensor Cutouts: No
• D-Rings Mount: Yes
• Weight: 115 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

The Fab Fours Ford Super Duty rear replacement bumper integrates the existing receiver hitch. In addition to added style and formed-steel durability, the vehicle gains lower steps and recovery points. Designed to be the ultimate in functionally-stylish rear-end protection.

Features

• Integrated steps on either side of the tailgate
• Durable formed steel construction
• Retain OEM receiver hitch and wiring locations
• 3/4" D-Ring recovery points
• Sensor sensitivity, OE sensor housing, orientation, and operating conditions are all variables that will influence functionality of the sensors
• All sensor testing is done on lifted trucks
• Any models older than 2008 require newer sensor housing

Specifications

• Position: Rear
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 3/16" US steel
• Step Included: Yes
• Sensor Cutouts: Yes
• D-Rings Mount: Yes
• Weight: 115 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

The Fab Fours Red Steel Rear Bumper focuses on strength, practicality, and affordability. Key features include easy install, Logo cut-out with integrated mount for LED pod lights, and the best value in the industry. Give your truck the rear end protection it needs at a price you can afford with Red Steel.

Features

• Industry best price point
• Ease of installation
• Perfectly follows the body lines
• Logo cut-out with integrated mount for LED pod lights
• Sensor compatible (when needed)

Specifications

• Position: Rear
• Color/Finish: 2 Stage Black Powder Coat
• Bumper Type: Heavy Duty
• Material: 11 Gauge Steel
• Step Included: Yes
• Sensor Cutouts: Yes
• D-Rings Mount: No
• Weight: 75 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Building on our reputation for the highest quality and design in the Truck and Jeep market, the Fab Fours Headache Rack focuses on strength, durability and safety.

Features

• Fab Fours signature knife edge design
• Rear brake light visibility vent
• Accepts Rigid industries surface mount 3X3 dually lights
• Matches Fab Fours matte black powder coat

Specifications

• Color/Finish: 2-Stage Black Powder Coat
• Material: 12 Gauge US Steel
• Weight: 50 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Building on our reputation for the highest quality and design in the Truck & Jeep market, the Fab Fours Side Steps focuses on strength, durability and safety. The 10" large full width stomp pad is made from 13 Gauge steel and is enclosed for your safety. Embossed logo and drain holes provide traction for solid footing.

Features

• Fully formed stamped steps
• 10" Large full-width stomp pad
• Embossed Fab Fours logo
• Patented design

Specifications

• Color/Finish: 2-Stage Black Powder Coat
• Material: 3" Tube
• Step Length: Cab Length
• Weight: 70 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Diamond rear bumper provides superior protection to the back of your vehicle. It allows access to all factory trailer plugs and factory installed tow hitch assembly. With attractive form and function, this diamond back bumper cosmetically covers all rear body parts, while its convenient step design allows for easy access to your truck bed.

Features

• Designed to accommodate factory hitch
• Heavy access to factory tow hooks or aftermarket hitch
• Cosmetically covers wiring and all rear parts
• Sleek diamond tread matches all other frontier products
• Provides an excellent step for accessing the truck bed
• Comes standard with dual license plate lights
• Deep skirts for full body coverage and protection
• Provides better garage ability due to snug fit to vehicle
• Frame mounted

Specifications

• Bumper Style: OEM
• Position: Rear
• Color/Finish: High Gloss Black Powder Coat
• Bumper Type: Heavy Duty
• Material: Steel
• Step Included: Yes
• Sensor Cutouts: Yes
• D-Rings Mount: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Diamond rear bumper provides superior protection to the back of your vehicle. It allows access to all factory trailer plugs and factory installed tow hitch assembly. With attractive form and function, this diamond back bumper cosmetically covers all rear body parts, while its convenient step design allows for easy access to your truck bed.

Features

• Designed to accommodate factory hitch
• Includes LED back up lights
• Heavy access to factory tow hooks or aftermarket hitch
• Cosmetically covers wiring and all rear parts
• Sleek diamond tread matches all other frontier products
• Provides an excellent step for accessing the truck bed
• Comes standard with dual license plate lights
• Deep skirts for full body coverage and protection
• Provides better garage ability due to snug fit to vehicle
• Frame mounted

Specifications

• Bumper Style: OEM
• Position: Rear
• Color/Finish: High Gloss Black Powder Coat
• Bumper Type: Heavy Duty
• Material: Steel
• Step Included: Yes
• Sensor Cutouts: Yes
• D-Rings Mount: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Heavy duty one-piece welded headache rack is made with heavy gauge steel square tubing. Heavy duty series headache racks not only keep you cooler by keeping the sun off your rear window, but they offer the best protection for your truck cab and bed when hauling items in your bed. In addition, these racks can provide a sturdy rest for cargo or to tie down loose objects. All headache racks come with a 32" long welded on leg that mounts to the truck bed.

Features

• Welded one-piece design
• Limited view with back up camera
• Includes LED back up lights and brake lights
• Wiring harness not included
• Installation requires drilling holes in bed
• High gloss long lasting baked on powder coat finish

Specifications

• Headache Rack Style: Louver
• Color/Finish: High Gloss Black Powder Coat
• Material: Steel
• Length: 32"

Vehicle Fitment 

Heavy duty one-piece welded headache rack is made with heavy gauge steel square tubing. Heavy duty series headache racks not only keep you cooler by keeping the sun off your rear window, but they offer the best protection for your truck cab and bed when hauling items in your bed. In addition, these racks can provide a sturdy rest for cargo or to tie down loose objects. All headache racks come with a 32" long welded on leg that mounts to the truck bed.

Features

• Welded one-piece design
• Wiring harness not included
• Installation requires drilling holes in bed
• High gloss long lasting baked on powder coat finish

Specifications

• Headache Rack Style: Louver
• Color/Finish: High Gloss Black Powder Coat
• Material: Steel
• Length: 32"

Vehicle Fitment 

Technical Files 

Installation Instructions

Heavy duty one-piece welded headache rack is made with heavy gauge steel square tubing. Heavy duty series headache racks not only keep you cooler by keeping the sun off your rear window, but they offer the best protection for your truck cab and bed when hauling items in your bed. In addition, these racks can provide a sturdy rest for cargo or to tie down loose objects. All headache racks come with a 32" long welded on leg that mounts to the truck bed.

Features

• Welded one-piece design
• Wiring harness not included
• Installation requires drilling holes in bed
• High gloss long lasting baked on powder coat finish

Specifications

• Headache Rack Style: Open
• Color/Finish: High Gloss Black Powder Coat
• Material: Steel
• Length: 32"

Vehicle Fitment 

Technical Files 

Installation Instructions

Heavy duty one-piece welded headache rack is made with heavy gauge steel square tubing. Heavy duty series headache racks not only keep you cooler by keeping the sun off your rear window, but they offer the best protection for your truck cab and bed when hauling items in your bed. In addition, these racks can provide a sturdy rest for cargo or to tie down loose objects. All headache racks come with a 32" long welded on leg that mounts to the truck bed.

Features

• Welded one-piece design
• Includes LED back up lights and brake lights
• Wiring harness not included
• Installation requires drilling holes in bed
• High gloss long lasting baked on powder coat finish

Specifications

• Headache Rack Style: Louver
• Color/Finish: High Gloss Black Powder Coat
• Material: Steel
• Length: 32"

Vehicle Fitment 

Technical Files 

Installation Instructions

Heavy duty one-piece welded headache rack is made with heavy gauge steel square tubing. Heavy duty series headache racks not only keep you cooler by keeping the sun off your rear window, but they offer the best protection for your truck cab and bed when hauling items in your bed. In addition, these racks can provide a sturdy rest for cargo or to tie down loose objects. All headache racks come with a 32" long welded on leg that mounts to the truck bed.

Features

• Welded one-piece design
• Includes LED back up lights and brake lights
• Wiring harness not included
• Installation requires drilling holes in bed
• High gloss long lasting baked on powder coat finish

Specifications

• Headache Rack Style: Open
• Color/Finish: High Gloss Black Powder Coat
• Material: Steel
• Length: 32"

Vehicle Fitment 

Technical Files 

Installation Instructions

Diamond steel rear bumper provides access to factory tow hooks or aftermarket hitch. with attractive form and function, the back replacement bumper also provides a convenient step design allows for easy access to your truck bed.

Features

• Maintain factory park assist sensor
• No drill installation
• Snug fit to the front of the vehicle
• Sleek lines to match truck contour
• Heavy duty fully welded one-piece design

Specifications

• Position: Rear
• Color/Finish: High Gloss Black Powder Coat
• Bumper Type: Heavy Duty
• Material: Steel
• Tow Hooks: Yes
• Sensor Cutouts: No
• D-Rings Mount: No

Vehicle Fitment 

When you put a grille guard on your truck you can be confident that your vehicle and more importantly your family are well protected. This is the best brush guard on the market! It features an original heavy duty one-piece design for only the best in efficiency and strength. The trademark punch-plate grille and full wrap around style has been designed to match the lines of your vehicle. Each custom-made product is constructed using the best technology and highest quality materials. Dedication to innovative ensures the sleekest aero-dynamic styling. For added protection and security, we frame mount all grille guards.

Features

• Accommodates factory tow hooks
• No drill installation
• Heavy duty one piece design
• Punch plate grille
• High gloss long lasting baked on powder coat finish
• Contoured uprights for aerodynamic styling
• Sleek lines to match vehicle
• Frame mounted for added security

Specifications

• Color/Finish: High Gloss Black Powder Coat
• Material: Steel
• Tow Hooks: Yes

Vehicle Fitment 

Technical Files 

Installation Instructions

Diamond steel front replacement bumper offers state-of-the-art construction and is designed for both rugged on and off-road use. Designed with its heavy-duty mounting system, the diamond steel front replacement bumper eliminates unnecessary wear on suspension while providing the toughest protection. Modern technology allows for no-drill installation for the front bumper while maintaining a snug fit to your truck. The modern design of front bumpers also accommodate all the latest factory technology that comes with the newer vehicles.

Features

• Accommodates factory tow hooks and fog lights
• No drill installation
• Sleek lines to match truck contour
• Snug fit to the front of the vehicle
• Heavy duty mounting system
• Eliminates excessive wear
• Accommodates license plate
• Designed for rugged on and off road use

Specifications

• Bumper Style: OEM
• Position: Front
• Color/Finish: High Gloss Black Powder Coat
• Bumper Type: Heavy Duty
• Material: Diamond Steel
• Tow Hooks: Yes
• Sensor Cutouts: No
• D-Rings Mount: No
• Winch Compatible: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Xtreme front bumper replacements offer maximum strength one-piece welded protection for the front of your vehicle. The Xtreme series provides impressive bumper coverage for your vehicle with contoured upper loops to achieve unique styling, while still providing full protection. The pioneering heavy duty one-piece design utilizes both brawn and efficiency. The modern design of front bumpers also accommodate all the latest factory technology that comes with the newer vehicles.

Features

• Accommodates factory tow hooks and fog lights
• Accommodates license plate
• Snug fit to the front of the vehicle
• No drill installation
• Sleek lines to match truck contour
• Heavy duty mounting system
• Designed for rugged on and off road use
• Eliminates excessive wear on suspension

Specifications

• Bumper Style: OEM
• Position: Front
• Color/Finish: High Gloss Black Powder Coat
• Bumper Type: Heavy Duty
• Material: Steel
• Tow Hooks: Yes
• Sensor Cutouts: No
• D-Rings Mount: No
• Winch Compatible: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Xtreme front bumper replacements offer maximum strength one-piece welded protection for the front of your vehicle. The Xtreme series provides impressive bumper coverage for your vehicle with contoured upper loops to achieve unique styling, while still providing full protection. The pioneering heavy duty one-piece design utilizes both brawn and efficiency. The modern design of front bumpers also accommodate all the latest factory technology that comes with the newer vehicles.

Features

• Accommodates factory tow hooks and fog lights
• No drill installation
• Will not accommodate OEM fog lights
• Designed to fit rigid 20" E-series light bar
• Accommodates license plate
• Snug fit to the front of the vehicle
• Sleek lines to match truck contour
• Heavy duty mounting system
• Designed for rugged on and off road use
• Eliminates excessive wear on suspension

Specifications

• Bumper Style: Light Mount
• Position: Front
• Color/Finish: High Gloss Black Powder Coat
• Bumper Type: Heavy Duty
• Material: Steel
• Tow Hooks: Yes
• Sensor Cutouts: No
• D-Rings Mount: No
• Winch Compatible: No

Vehicle Fitment 

Computer drawn and laser cut American steel give our bumpers a precision fit and finish. Easy installation using factory mounting points. All the necessary hardware and 1/4" heavy duty bumper brackets are included. No cutting or drilling required.

Features

• 1/4" full width face plate with 11 Gauge gussets for superior strength and support
• Air vents provide cooling and a distinct appearance
• End caps to minimize road grime from your tires
• Standard holes and mounting tabs for factory fog lights (if applicable)
• Also includes clevis mounts

Specifications

• Position: Front
• Bumper Type: Heavy Duty
• Color/Finish: Optional
• Material: Steel
• D-Rings Mount: Yes
• Winch Compatible: Optional
• Sensor Cutouts: Optional

Vehicle Fitment 

Computer drawn and laser cut American steel give our bumpers a precision fit and finish. Easy installation using factory mounting points. All necessary hardware and heavy duty bumper brackets are included. No drilling required.

Features

• 11 Gauge construction with 4 gussets for superior strength and support
• End caps to minimize road grime from your tires
• Includes clevis mounts
• Trailer plug mount (if applicable)

Specifications

• Position: Rear
• Bumper Type: Heavy Duty
• Color/Finish: Optional
• Material: Steel
• D-Rings Mount: Yes
• Step Included: Yes
• Sensor Cutouts: Optional

Vehicle Fitment 

Computer drawn and laser cut American steel give our bumpers a precision fit and finish. Easy installation using factory mounting points. All necessary hardware and heavy duty bumper brackets are included. No drilling required.

Features

• 11 Gauge construction with 4 gussets for superior strength and support
• End caps to minimize road grime from your tires
• Includes clevis mounts
• Trailer plug mount (if applicable)

Specifications

• Position: Rear
• Bumper Type: Heavy Duty
• Color/Finish: Optional
• Material: Steel
• D-Rings Mount: Yes
• Step Included: Yes
• Sensor Cutouts: Optional

Vehicle Fitment 

Hammerhead front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving. Accommodates up to four 3.25" x 3.25" external dimension cube after-market off-road fog light. Reinforced to allow for extra strength while keeping the bumper as light as possible. The shackle mounts are a part of the mounting surface to the frame, extending through the bumper and are welded on the inside and outside of the bumper. The X-series style brush guard is made with 1.75" x 0.120" wall tubing will accommodate front receiver hitch.

Features

• Engineered to provide the ultimate in style and protection
• Designed to make your vehicles appearance more aggressive
• Crafted from high-strength materials to endure for years to come
• Verified to work with the following warn winches: VR8000, VR10000, VR12000, M8000, XD9000i, XD9000, ZEON8, ZEON10, ZEON12, ZEON12-Platinum and M12000

Specifications

• Position: Front
• Bumper Type: Heavy Duty
• Color/Finish: 2-Stage Black Powder Coat
• Material: 3/16" Steel Plate
• D-Rings Mount: Yes
• Winch Compatible: Yes
• Sensor Cutouts: No
• Weight: 232 lb

Vehicle Fitment 

Hammerhead front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving. This front bumper accommodates up to four 3.25" x 3.25" external dimension cube after-market off-road fog lights, as well as lights on the pre-runner bar. Each bumper is made with 3/16" thick plate steel and are reinforced brackets to allow for extra strength while keeping the bumpers as light as possible. The shackle mounts are a part of the mounting surface to the frame, extending through the bumper and are welded on the inside and outside of the bumper. The pre-runner style brush guard is made with 1.75" x 0.120" wall tubing. This bumper will accommodate a front receiver hitch.

Features

• Engineered to provide the ultimate in style and protection
• Designed to make your vehicles appearance more aggressive
• Crafted from high-strength materials to endure for years to come
• Verified to work with the following Warn winches: VR8000, VR10000, VR12000, M8000, XD9000i, XD9000, ZEON8, ZEON10, ZEON12, ZEON12-Synthetic, and M12000

Specifications

• Position: Front
• Series: X-Series
• Bumper Type: Heavy Duty
• Color/Finish: 2-Stage Black Powder Coat
• Material: 3/16" Steel Plate
• D-Rings Mount: Yes
• Winch Compatible: Yes
• Sensor Cutouts: No
• Weight: 198 lb

Vehicle Fitment 

Hammerhead rear bumpers are designed to stand up to the punishment of on-road and off-road driving. Reinforced to allow for extra strength while keeping the bumper as light as possible. Includes reverse lights and tag lights, steps, and shackle mounts. The shackle mounts are a part of the mounting surface to the frame, extending through the bumper and are welded on the inside and outside of the bumper.

Features

• Engineered to provide the ultimate in style and protection
• Designed to make your vehicles appearance more aggressive
• Crafted from high-strength materials to endure for years to come

Specifications

• Position: Rear
• Bumper Type: Heavy Duty
• Color/Finish: 2-Stage Black Powder Coat
• Material: 1/4" Steel Plate
• Step Included: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: Yes
• Weight: 144 lb

Vehicle Fitment 

Get the Hammerhead black wheel to wheel running boards and make getting in and out of your vehicle a safer experience. Hammerhead running boards are built tough hold up to 300 pounds on each stepping platform, with three platforms on each board. Hammerhead wheel to wheel running boards are made in the USA from high grade 1.75" steel tubing and are finished in a 2 stage black powder-coat that will hold up to the harshest conditions.

Features

• Mounted securely to the cab or the body mounts depending on application
• Has three platforms per side allowing access to each door, as well as access to the bed
• Each running board platform has the ability to hold up to 300 pounds (a combined 900 pounds total weight)

Specifications

• Color/Finish: 2-Stage Black Powder Coat
• Material: 1.75" x 0.120" Wall Tubing Frame
• Step Length: Wheel to Wheel
• Weight: 121 lb

Vehicle Fitment 

Running Boards are designed and built right here in the USA with high grade steel and look aggressive with the textured black powder-coating. These boards provide you with a great looking step to aid in safely getting you in and out of your vehicle and even feature a bottle opener at the front of each board. Hammerhead crafts these from 1.75" x .120" high grade steel tubing and finishes them with a two-stage black powder-coating.

Features

• Mounted securely to the cab or the body mounts depending on application
• Has three platforms per side allowing access to each door, as well as access to the bed
• Each running board platform has the ability to hold up to 300 pounds (a combined 900 pounds total weight)

Specifications

• Color/Finish: 2-Stage Black Powder Coat
• Material: 1.75" x 0.120" Wall Tubing Frame
• Step Length: Cab Length
• Weight: 132 lb

Vehicle Fitment 

Running Boards are designed and built right here in the USA with high grade steel and look aggressive with the textured black powder-coating. These boards provide you with a great looking step to aid in safely getting you in and out of your vehicle and even feature a bottle opener at the front of each board. Hammerhead crafts these from 1.75" x .120" high grade steel tubing and finishes them with a two-stage black powder-coating.

Features

• Mounted securely to the cab or the body mounts depending on application
• Has two platforms per side allowing access to each door
• Each running board platform has the ability to hold up to 300 pounds (a combined 600 pounds total weight)

Specifications

• Color/Finish: 2-Stage Black Powder Coat
• Material: 1.75" x 0.120" Wall Tubing Frame
• Step Length: Cab Length
• Weight: 95 lb

Vehicle Fitment 

Hammerhead front bumpers are designed to stand up to the punishment of on-road and off-road driving. Accommodates up to four 3.25" x 3.25" external dimension cube after-market off-road fog lights, as well as a 20" light bar in the center of the bumper. Reinforced to allow for extra strength while keeping the bumper as light as possible. The shackle mounts are a part of the mounting surface to the frame, extending through the bumper and are welded on the inside and outside of the bumper. This bumper will not accommodate a winch or front receiver hitch.

Features

• Engineered to provide the ultimate in style and protection
• Designed to make your vehicles appearance more aggressive
• Crafted from high-strength materials to endure for years to come

Specifications

• Position: Front
• Bumper Type: Heavy Duty
• Color/Finish: 2-Stage Black Powder Coat
• Material: 3/16" Plate Steel
• D-Rings Mount: Yes
• Winch Compatible: No
• Sensor Cutouts: No
• Weight: 122 lb

Vehicle Fitment 

Hammerhead front bumpers are designed to stand up to the punishment of on-road and off-road driving. This front bumpers accommodates up to four 3.25" x 3.25" external dimension cube after-market off-road fog lights, as well as lights on the pre-runner bar and a 20" light bar in the center of the bumper. Reinforced to allow for extra strength while keeping the bumper as light as possible. The shackle mounts are a part of the mounting surface to the frame, extending through the bumper and are welded on the inside and outside of the bumper. The pre-runner brush guard is made with 1.75" x 0.120" wall tubing. This bumper will not accommodate a winch or front receiver hitch.

Features

• Engineered to provide the ultimate in style and protection
• Designed to make your vehicles appearance more aggressive
• Crafted from high-strength materials to endure for years to come

Specifications

• Position: Front
• Bumper Type: Heavy Duty
• Color/Finish: 2-Stage Black Powder Coat
• Material: 3/16" Steel Plate
• D-Rings Mount: Yes
• Winch Compatible: No
• Sensor Cutouts: No
• Weight: 142 lb

Vehicle Fitment 

Hammerhead rear bumpers are designed to stand up to the punishment of on-road and off-road driving. Reinforced to allow for extra strength while keeping the bumper as light as possible. Includes tag lights, steps, and shackle mounts. The shackle mounts are a part of the mounting surface to the frame, extending through the bumper and are welded on the inside and outside of the bumper.

Features

• Engineered to provide the ultimate in style and protection
• Designed to make your vehicles appearance more aggressive
• Crafted from high-strength materials to endure for years to come

Specifications

• Position: Rear
• Bumper Type: Heavy Duty
• Color/Finish: 2-Stage Black Powder Coat
• Material: 1/4" Steel Plate
• Step Included: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: Yes
• Weight: 142 lb

Vehicle Fitment