BumperSuperstore.com » Aluminum

Degree shims are generally installed between rear leaf springs and the axle. Designed with a taper to rotate the rear axle to help eliminate vibrations that can sometimes occur in lifted vehicles.

• 3" wide
• Includes (4) 1/2" extended center pins w/nuts
• Rotates rear axle to help eliminate vibrations

Degree shims are generally installed between rear leaf springs and the axle. Designed with a taper to rotate the rear axle to help eliminate vibrations that can sometimes occur in lifted vehicles.

• 3" wide
• 3 degree angle
• Includes (4) 1/2" extended center pins w/nuts
• Rotates rear axle to help eliminate vibrations

Degree shims are generally installed between rear leaf springs and the axle. Designed with a taper to rotate the rear axle to help eliminate vibrations that can sometimes occur in lifted vehicles.

• 3" wide
• 6 degree angle
• Includes (4) 1/2" extended center pins w/nuts
• Rotates rear axle to help eliminate vibrations

Tuff Country cast iron lift blocks are designed to lift the rear end of the Nissan Titan with leaf springs above the rear axle.

• 2.5" wide, 2" tall
• Aluminum
• Designed for rear axle of vehicles only
• Non-tapered

Tuff Country aluminum lift blocks are designed to lift the rear end of the Tacoma with leaf springs above the rear axle.

• 2" wide, 1.25" tall
• Aluminum
• Designed for rear axle of vehicles only
• Non-tapered

Tuff Country aluminum lift blocks are designed to lift the rear end of the Toyota Tundra with leaf springs above the rear axle.

• 2.5" wide, 3" tall
• Aluminum
• Designed for rear axle of vehicles only
• Tapered

Tuff Country Suspension 2" lift kit for the Jeep Wrangler JL is a simple economical lift kit that uses front and rear coil spacers to lift your JL without affecting ride quality. Made of durable machined billet aluminum these spacers look great and will never wear out. Once installed will allow up to 35 inch tires (37 inch tires on Rubicon models).

• Machined billet coil spring spacers
• Simple installation
• Extended shocks are required
• Allows use of 35" x 12.5" tires, 37" on Rubicon models

The capture fairlead system holds your hook in place when not in use, giving you the ultimate form and function. Hook capture system keeps your hook from dangling outside your vehicle making a clean and low profile front end. Built from 1 5/16" thick CNC machined high quality aerospace aluminium the capture fairlead is rated for up to 20,000 lb to help with all your winching needs. Available in raw aluminium or a military grade hard anodized black finish to withstand everyday use. Fits nearly any aftermarket winch front bumper. For synthetic winch rope only.

Features

• 1 5/16" thick
• Rated for up to 20,000 lb
• CNC machine from high quality aerospace aluminium
• For synthetic winch rope only

Specifications

• Color/Finish: Raw Aluminium
• Material: Aluminium

Vehicle Fitment 

This part is universal

Technical Files 

Installation Instructions

Videos 

The capture fairlead system holds your hook in place when not in use, giving you the ultimate form and function. Hook capture system keeps your hook from dangling outside your vehicle making a clean and low profile front end. Built from 1 5/16" thick CNC machined high quality aerospace aluminium the capture fairlead is rated for up to 20,000 lb to help with all your winching needs. Available in raw aluminium or a military grade hard anodized black finish to withstand everyday use. Fits nearly any aftermarket winch front bumper. For synthetic winch rope only.

Features

• 1 5/16" thick
• Rated for up to 20,000 lb
• CNC machine from high quality aerospace aluminium
• For synthetic winch rope only

Specifications

• Color/Finish: Black Anodized
• Material: Aluminium

Vehicle Fitment 

This part is universal

Technical Files 

Installation Instructions

Videos 

ADD has taken innovation and ingenuity to the next level and is introducing first ever ADD MaxRax roof rack system. What makes roof rack system unique to others in the market is that it is universal and light weight, weighing on average 15 lb depending on the mounting hardware. The rack comes complete with universal light mount system that allows for cube lights, single row and dual row light bars to mount in multiple locations on all four sides of the roof rack. The bottom of the ADD MaxRax roof rack incorporates slats that are adjustable to your desired width to fit bags, coolers, etc. For jeep JK there are two mounting options to choose from: roll cage mount for when the top is off and hard top mount for when the hard top is on there is no soft top mount available at this time. The all-aluminium system built from 5052-0 and receives hammer black six-stage powder coat before it is shipped. Assembly is required and is easily bolted together. Patent pending.

Features

• Designed for camper shells
• Adjustable slats to change width
• Universal light mount system
• Light weight

Specifications

• Color: Hammer Black
• Material: 5052 Aluminium
• Load Capacity: 15 lb
• Length: 55"
• Width: 50.25"
• Height: 5.25"

Vehicle Fitment 

This Part is Universal

Technical Files 

Installation Instructions

Addictive Desert Designs has taken innovation and ingenuity to the next level and is introducing first ever ADD MaxRax roof rack system. What makes roof rack system unique to others in the market is that it is universal and light weight, weighing on average 15 lb depending on the mounting hardware. The rack comes complete with universal light mount system that allows for cube lights, single row and dual row light bars to mount in multiple locations on all four sides of the roof rack. The bottom of the ADD MaxRax roof rack incorporates slats that are adjustable to your desired width to fit bags, coolers, etc. For jeep JK there are two mounting options to choose from: roll cage mount for when the top is off and hard top mount for when the hard top is on there is no soft top mount available at this time. The all-aluminium system built from 5052-0 and receives hammer black six-stage powder coat before it is shipped. Assembly is required and is easily bolted together. Patent pending.

Features

• Designed for camper shells
• Adjustable slats to change width
• Universal light mount system
• Light weight

Specifications

• Color: Hammer Black
• Material: 5052 Aluminium
• Load Capacity: 15 lb
• Dimensions: 55" L x 50.25" W x 5.25" H
• Weight: 30 lb

Vehicle Fitment 

This Part is Universal

Technical Files 

Installation Instructions

ADD has taken innovation and ingenuity to the next level and is introducing first ever ADD MaxRax roof rack system. What makes roof rack system unique to others in the market is that it is universal and light weight, weighing on average 15 lb depending on the mounting hardware. The rack comes complete with universal light mount system that allows for cube lights, single row and dual row light bars to mount in multiple locations on all four sides of the roof rack. The bottom of the ADD MaxRax roof rack incorporates slats that are adjustable to your desired width to fit bags, coolers, etc. For jeep JK there are two mounting options to choose from: roll cage mount for when the top is off and hard top mount for when the hard top is on there is no soft top mount available at this time. The all-aluminium system built from 5052-0 and receives hammer black six-stage powder coat before it is shipped. Assembly is required and is easily bolted together. Patent pending.

Features

• Designed for camper shells
• Adjustable slats to change width
• Universal light mount system
• Light weight

Specifications

• Color: Hammer Black
• Material: 5052 Aluminium
• Load Capacity: 15 lb
• Length: 48"
• Width: 55"
• Height: 5.25"

Vehicle Fitment 

This Part is Universal

Technical Files 

Installation Instructions

Addictive Desert Designs has taken innovation and ingenuity to the next level and is introducing first ever ADD MaxRax roof rack system. What makes roof rack system unique to others in the market is that it is universal and light weight, weighing on average 15 lb depending on the mounting hardware. The rack comes complete with universal light mount system that allows for cube lights, single row and dual row light bars to mount in multiple locations on all four sides of the roof rack. The bottom of the ADD MaxRax roof rack incorporates slats that are adjustable to your desired width to fit bags, coolers, etc. For jeep JK there are two mounting options to choose from: roll cage mount for when the top is off and hard top mount for when the hard top is on there is no soft top mount available at this time. The all-aluminium system built from 5052-0 and receives hammer black six-stage powder coat before it is shipped. Assembly is required and is easily bolted together. Patent pending.

Features

• Designed for camper shells
• Adjustable slats to change width
• Universal light mount system
• Light weight

Specifications

• Color: Hammer Black
• Material: 5052 Aluminium
• Load Capacity: 15 lb
• Dimensions: 48" L x 55" W x 5.25" H
• Weight: 30 lb

Vehicle Fitment 

This Part is Universal

Technical Files 

Installation Instructions

ADD has taken innovation and ingenuity to the next level and is introducing first ever ADD MaxRax roof rack system. What makes roof rack system unique to others in the market is that it is universal and light weight, weighing on average 15 lb depending on the mounting hardware. The rack comes complete with universal light mount system that allows for cube lights, single row and dual row light bars to mount in multiple locations on all four sides of the roof rack. The bottom of the ADD MaxRax roof rack incorporates slats that are adjustable to your desired width to fit bags, coolers, etc. For jeep JK there are two mounting options to choose from: roll cage mount for when the top is off and hard top mount for when the hard top is on there is no soft top mount available at this time. The all-aluminium system built from 5052-0 and receives hammer black six-stage powder coat before it is shipped. Assembly is required and is easily bolted together. Patent pending.

Features

• Designed for camper shells
• Adjustable slats to change width
• Universal light mount system
• Light weight

Specifications

• Color: Hammer Black
• Material: 5052 Aluminium
• Load Capacity: 15 lb
• Length: 55"
• Width: 42"
• Height: 5.25"

Vehicle Fitment 

This Part is Universal

Technical Files 

Installation Instructions

Addictive Desert Designs has taken innovation and ingenuity to the next level and is introducing first ever ADD MaxRax roof rack system. What makes roof rack system unique to others in the market is that it is universal and light weight, weighing on average 15 lb depending on the mounting hardware. The rack comes complete with universal light mount system that allows for cube lights, single row and dual row light bars to mount in multiple locations on all four sides of the roof rack. The bottom of the ADD MaxRax roof rack incorporates slats that are adjustable to your desired width to fit bags, coolers, etc. For jeep JK there are two mounting options to choose from: roll cage mount for when the top is off and hard top mount for when the hard top is on there is no soft top mount available at this time. The all-aluminium system built from 5052-0 and receives hammer black six-stage powder coat before it is shipped. Assembly is required and is easily bolted together. Patent pending.

Features

• Designed for camper shells
• Adjustable slats to change width
• Universal light mount system
• Light weight

Specifications

• Color: Hammer Black
• Material: 5052 Aluminium
• Load Capacity: 15 lb
• Dimensions: 55" L x 42" W x 5.25" H
• Weight: 30 lb

Vehicle Fitment 

This Part is Universal

Technical Files 

Installation Instructions

ADD has taken innovation and ingenuity to the next level and is introducing first ever ADD MaxRax roof rack system. What makes roof rack system unique to others in the market is that it is universal and light weight, weighing on average 15 lb depending on the mounting hardware. The rack comes complete with universal light mount system that allows for cube lights, single row and dual row light bars to mount in multiple locations on all four sides of the roof rack. The bottom of the ADD MaxRax roof rack incorporates slats that are adjustable to your desired width to fit bags, coolers, etc. For jeep JK there are two mounting options to choose from: roll cage mount for when the top is off and hard top mount for when the hard top is on there is no soft top mount available at this time. The all-aluminium system built from 5052-0 and receives hammer black six-stage powder coat before it is shipped. Assembly is required and is easily bolted together. Patent pending.

Features

• Designed for camper shells
• Adjustable slats to change width
• Universal light mount system
• Light weight

Specifications

• Color: Hammer Black
• Material: 5052 Aluminium
• Load Capacity: 15 lb

Vehicle Fitment 

This Part is Universal

Technical Files 

Installation Instructions

Addictive Desert Designs has taken innovation and ingenuity to the next level and is introducing first ever ADD MaxRax roof rack system. What makes roof rack system unique to others in the market is that it is universal and light weight, weighing on average 15 lb depending on the mounting hardware. The rack comes complete with universal light mount system that allows for cube lights, single row and dual row light bars to mount in multiple locations on all four sides of the roof rack. The bottom of the ADD MaxRax roof rack incorporates slats that are adjustable to your desired width to fit bags, coolers, etc. For jeep JK there are two mounting options to choose from: roll cage mount for when the top is off and hard top mount for when the hard top is on there is no soft top mount available at this time. The all-aluminium system built from 5052-0 and receives hammer black six-stage powder coat before it is shipped. Assembly is required and is easily bolted together. Patent pending.

Features

• Designed for camper shells
• Adjustable slats to change width
• Universal light mount system
• Light weight

Specifications

• Color: Hammer Black
• Material: 5052 Aluminium
• Load Capacity: 15 lb
• Dimensions: 48" L x 48" W x 5.25" H
• Weight: 30 lb

Vehicle Fitment 

This Part is Universal

Technical Files 

Installation Instructions

ADD has taken innovation and ingenuity to the next level and is introducing first ever ADD MaxRax roof rack system. What makes roof rack system unique to others in the market is that it is universal and light weight, weighing on average 15 lb depending on the mounting hardware. The rack comes complete with universal light mount system that allows for cube lights, single row and dual row light bars to mount in multiple locations on all four sides of the roof rack. The bottom of the ADD MaxRax roof rack incorporates slats that are adjustable to your desired width to fit bags, coolers, etc. For jeep JK there are two mounting options to choose from: roll cage mount for when the top is off and hard top mount for when the hard top is on there is no soft top mount available at this time. The all-aluminium system built from 5052-0 and receives hammer black six-stage powder coat before it is shipped. Assembly is required and is easily bolted together. Patent pending.

Features

• Designed for camper shells
• Adjustable slats to change width
• Universal light mount system
• Light weight

Specifications

• Color: Hammer Black
• Material: 5052 Aluminium
• Load Capacity: 15 lb
• Length: 48"
• Width: 52"
• Height: 5.25"

Vehicle Fitment 

This Part is Universal

Technical Files 

Installation Instructions

Addictive Desert Designs has taken innovation and ingenuity to the next level and is introducing first ever ADD MaxRax roof rack system. What makes roof rack system unique to others in the market is that it is universal and light weight, weighing on average 15 lb depending on the mounting hardware. The rack comes complete with universal light mount system that allows for cube lights, single row and dual row light bars to mount in multiple locations on all four sides of the roof rack. The bottom of the ADD MaxRax roof rack incorporates slats that are adjustable to your desired width to fit bags, coolers, etc. For jeep JK there are two mounting options to choose from: roll cage mount for when the top is off and hard top mount for when the hard top is on there is no soft top mount available at this time. The all-aluminium system built from 5052-0 and receives hammer black six-stage powder coat before it is shipped. Assembly is required and is easily bolted together. Patent pending.

Features

• Designed for camper shells
• Adjustable slats to change width
• Universal light mount system
• Light weight

Specifications

• Color: Hammer Black
• Material: 5052 Aluminium
• Load Capacity: 15 lb
• Dimensions: 48" L x 52" W x 5.25" H
• Weight: 30 lb

Vehicle Fitment 

This Part is Universal

Technical Files 

Installation Instructions

Beef up your wheel wells and gain functionality with the ADD rock fighter inner fender liners. These liners pair perfectly with rock fighter fenders but can also be used with OEM fenders. The low-profile construction allows the use of 37" tires with aftermarket fenders or modified OEM fenders. The fully bolt-on design lets you get the most out of your jeep wrangler JL with ease. As always, this product is made in America.

Features

• Constructed from aluminium
• Compatible with OEM fenders
• Added clearance allows the use of 37" tires on OEM height
• Provides extra protection over OEM liners
• Fully bolt-on

Specifications

• Position: Front
• Color/Finish: Polished Aluminum
• Material: Aluminium
• Weight: 30 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Videos 

Aluminess designed the front winch bumper for the 1992-2007 Ford Econoline to look good and perform even better. The all-aluminum construction weighs just 85 pounds, so there is no need to worry about brakes, suspension, steering, and tires wearing out prematurely. Aluminum also doesn't rust, so your bumper will hold up even in salty environments. The 1992-2007 Ford Van front bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don't run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don't want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8"pin. Whether you want to tackle the off road or protect your rig against pesky wildlife, an Aluminess bumper is sure to get the job done.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess designed the front winch bumper for the 1992-2007 Ford Econoline to look good and perform even better. The all-aluminum construction weighs just 85 pounds, so there is no need to worry about brakes, suspension, steering, and tires wearing out prematurely. Aluminum also doesn't rust, so your bumper will hold up even in salty environments. The 1992-2007 Ford Van front bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don't run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don't want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8"pin. Whether you want to tackle the off road or protect your rig against pesky wildlife, an Aluminess bumper is sure to get the job done.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Storage is a premium when converting a van into your home away from home. If your Ford Econoline is a 44, then you also have to compete with a tire that no longer fits underneath your van. In most cases, any of the boxes will work on the swing arm, so whether its extra fuel, a generator, or recovery gear that you need, your Aluminess off road rear bumper is there to save the day.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"

Vehicle Fitment 

Technical Files 

Installation Instructions

Storage is a premium when converting a van into your home away from home. If your Ford Econoline is a 44, then you also have to compete with a tire that no longer fits underneath your van. The solution is an Aluminess off road rear bumper the box swing arm. In most cases, any of the boxes will work on the swing arm, so whether its extra fuel, a generator, or recovery gear that you need, your Aluminess off road rear bumper is there to save the day.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Swing Arm Weight Limit: 150 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess Bike Rack Swing Arm is designed to replace the existing box arm on your Aluminess rear bumper. The bike rack swing arm is able to hold 2 bikes and swing open with your Aluminess Box. The swing arm is designed to clear tires up to 35" in diameter and is available for most of existing rear bumpers. The swing arm is capable of holding 100 pounds on the upper platform and 100 pounds on the lower platform. Aluminess recommends the swing arm be installed with 1-UP USA bike rack trays. They are available for purchase from Aluminess with necessary hardware for easy installation. Other bike rack trays may work with platform, but have not been tested. Therefore, no warranty is available with other bike rack mounts.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Bike Rack Swing Arm Weight Limit: 200 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Storage is a premium when converting a van into your home away from home. If your Ford Econoline is a 44, then you also have to compete with a tire that no longer fits underneath your van. The solution is an Aluminess off road rear bumper the box swing arm. In most cases, any of the boxes will work on the swing arm, so whether its extra fuel, a generator, or recovery gear that you need, your Aluminess off road rear bumper is there to save the day.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Swing Arm Weight Limit: 150 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess Bike Rack Swing Arm is designed to replace the existing box arm on your Aluminess rear bumper. The bike rack swing arm is able to hold 2 bikes and swing open with your Aluminess Box. The swing arm is designed to clear tires up to 35" in diameter and is available for most of existing rear bumpers. The swing arm is capable of holding 100 pounds on the upper platform and 100 pounds on the lower platform. Aluminess recommends the swing arm be installed with 1-UP USA bike rack trays. They are available for purchase from Aluminess with necessary hardware for easy installation. Other bike rack trays may work with platform, but have not been tested. Therefore, no warranty is available with other bike rack mounts.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Bike Rack Swing Arm Weight Limit: 200 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Toyota hit a home run with the full size Toyota Tundra. Its aggressive styles calls out for a bumper that can handle the toughest elements. The Aluminess winch bumper for the 07-13 Toyota Tundra's fits a compact 9000 pound winch and has integrated shackle mounts. The all aluminum construction weighs only 85 pounds and won't rust. The durable powder coating doesn't flake or peel even if you scratch it on a rock. The bumper is even stout enough to protect your truck against encounters with wildlife.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Toyota hit a home run with the full size Toyota Tundra. Its aggressive styles calls out for a bumper that can handle the toughest elements. The Aluminess winch bumper for the 07-13 Toyota Tundra's fits a compact 9000 pound winch and has integrated shackle mounts. The all aluminum construction weighs only 85 pounds and won't rust. The durable powder coating doesn't flake or peel even if you scratch it on a rock. The bumper is even stout enough to protect your truck against encounters with wildlife.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Whether you have an Aluminess roof rack, or just a plastic storage box, the van roofs are a great place to store bulky things. The problem is how you get up there to strap everything down. Aluminess solves this problem with their all aluminum ladders. These mount to the side of the vehicle solving the problem of drilling through your rear van door. Passenger side ladders are recommended to avoid traffic unless you have an awning that gets in the way.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Vehicle Fitment 

Technical Files 

Installation Instructions

Whether you have an Aluminess roof rack, or just a plastic storage box, the van roofs are a great place to store bulky things. The problem is how you get up there to strap everything down. Aluminess solves this problem with their all aluminum ladders. These mount to the side of the vehicle solving the problem of drilling through your rear van door.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Vehicle Fitment 

Technical Files 

Installation Instructions

Four Wheel Drive conversions often lift the van higher off the ground. This means that an already tall vehicle becomes more difficult to get into. The Aluminess Nerf Bars make it easy to get in and out of your van again. With 20" long tread plate steps at each door, there is ample room to step into the van with ease. The all Aluminum construction is great for keeping the weight down and the powder coated finish is durable enough to handle the toughest elements.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• Mounting brackets included
• Nerf bars include both driver and passenger side

Vehicle Fitment 

Technical Files 

Installation Instructions

The Chevy Silverado is one of the most customized trucks on the road. Everywhere you look there is a Silverado that has had some work done to it. Set yourself apart with an Aluminess bumper that not only looks good, but functions great as well. It is light weight so strain on your steering, brakes, tires, and suspension is kept to a minimum. With 2 swing arms to hold your spare tire and a storage box, you will now have more room for the essentials. In most cases, any of the Aluminess boxes will work on the swing arm, so whether its extra fuel, a generator, or recovery gear that you need, your Aluminess Rear Bumper is there to save the day.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Swing Arm Weight Limit: 150 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess rear bumpers were originally designed for trucks with campers. Extra storage and easy access to the spare tire are very important and the Aluminess rear bumper delivers. Now off-road enthusiasts of all types are enjoying the benefits of Aluminess rear bumpers. With the option to carry over-sized spares, extra fuel, and watertight storage, there isn't an off-roader that couldn't find a use for an Aluminess rear bumper.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Bike Rack Swing Arm Weight Limit: 150 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess rear bumpers were originally designed for trucks with campers. Extra storage and easy access to the spare tire are very important and the Aluminess rear bumper delivers. Now off-road enthusiasts of all types are enjoying the benefits of Aluminess rear bumpers. With the option to carry over-sized spares, extra fuel, and watertight storage, there isn't an off-roader that couldn't find a use for an Aluminess rear bumper.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"

Vehicle Fitment 

Technical Files 

Installation Instructions

The Chevy Silverado is one of the most customized trucks on the road. Everywhere you look there is a Silverado that has had some work done to it. Set yourself apart with an Aluminess winch bumper that not only looks good, but functions great as well. We craft our bumpers using aircraft grade aluminum and they are light weight, so strain on your steering, brakes, tires, and suspension is kept to a minimum. Every Aluminess front bumper comes equipped with a winch compartment and integrated tow hooks to get you out of the stickiest situations. It has durable powder coating that will look good for years to come.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

The Chevy Silverado is one of the most customized trucks on the road. Everywhere you look there is a Silverado that has had some work done to it. Set yourself apart with an Aluminess winch bumper that not only looks good, but functions great as well. We craft our bumpers using aircraft grade aluminum and they are light weight, so strain on your steering, brakes, tires, and suspension is kept to a minimum. Every Aluminess front bumper comes equipped with a winch compartment and integrated tow hooks to get you out of the stickiest situations. It has durable powder coating that will look good for years to come.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess front winch bumper for the 99-05 Excursions will hold a large winch and come with integrated tow hooks. Wet and salty environments can wreak havoc on steel bumpers and make them rust out in no time. Aluminum doesn't rust so you can be sure that your Aluminess bumper will hold up even in salty environments. The lighter weight of aluminum also prolongs the life of your brakes, tires, suspension, and steering when compared to steel bumpers. Despite its light weight, it is still very strong. Aluminess bumpers have survived collisions with deer, bear and elk. The front winch bumper for the 99-05 Excursions were designed specifically for the vehicle to match all of the body lines. This winch bumper looks as good as it functions.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess front winch bumper for the 99-05 Excursions will hold a large winch and come with integrated tow hooks. Wet and salty environments can wreak havoc on steel bumpers and make them rust out in no time. Aluminum doesn't rust so you can be sure that your Aluminess bumper will hold up even in salty environments. The lighter weight of aluminum also prolongs the life of your brakes, tires, suspension, and steering when compared to steel bumpers. Despite its light weight, it is still very strong. Aluminess bumpers have survived collisions with deer, bear and elk. The front winch bumper for the 99-05 Excursions were designed specifically for the vehicle to match all of the body lines. This winch bumper looks as good as it functions.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess front winch bumpers for the 2005-2007 Ford Super Duty truck will hold a large winch and come with integrated tow hooks. Wet and salty environments can wreak havoc on steel bumpers and make them rust out in no time. Aluminum doesn't rust, so you can be sure that your Aluminess off road bumper will hold up even in salty environments. The lighter weight of aluminum also prolongs the life of your brakes, tires, suspension, and steering when compared to steel bumpers. Despite it being light weight, it is still very strong. Aluminess bumpers have survived collisions with deer, bear, and elk. The front winch bumper for the 2005-2007 Ford Super Duty truck was designed specifically for the vehicle to match all of the body lines. This off road bumper looks as good as it functions.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess front winch bumpers for the 2005-2007 Ford Super Duty truck will hold a large winch and come with integrated tow hooks. Wet and salty environments can wreak havoc on steel bumpers and make them rust out in no time. Aluminum doesn't rust, so you can be sure that your Aluminess off road bumper will hold up even in salty environments. The lighter weight of aluminum also prolongs the life of your brakes, tires, suspension, and steering when compared to steel bumpers. Despite it being light weight, it is still very strong. Aluminess bumpers have survived collisions with deer, bear, and elk. The front winch bumper for the 2005-2007 Ford Super Duty truck was designed specifically for the vehicle to match all of the body lines. This off road bumper looks as good as it functions.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Ford went away from the classic style grills for one that lined up with the headlights. Aluminess designed an all new winch bumper to match this new grill design and fit like a glove. The Aluminess front winch bumper for the 08-10 Super Duty will hold a large winch and comes with integrated tow hooks. Wet and salty environments can wreak havoc on steel bumpers and make them rust out in no time. Aluminum doesn't rust so you can be sure that your Aluminess bumper will hold up even in salty environments. The lighter weight of aluminum also prolongs the life of your brakes, tires, suspension, and steering when compared to steel bumpers. Despite it being light weight, it is still very strong. Aluminess bumpers have survived collisions with deer, bear and elk. This winch bumper looks as good as it functions.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Ford went away from the classic style grills for one that lined up with the headlights. Aluminess designed an all new winch bumper to match this new grill design and fit like a glove. The Aluminess front winch bumper for the 08-10 Super Duty will hold a large winch and comes with integrated tow hooks. Wet and salty environments can wreak havoc on steel bumpers and make them rust out in no time. Aluminum doesn't rust so you can be sure that your Aluminess bumper will hold up even in salty environments. The lighter weight of aluminum also prolongs the life of your brakes, tires, suspension, and steering when compared to steel bumpers. Despite it being light weight, it is still very strong. Aluminess bumpers have survived collisions with deer, bear and elk. This winch bumper looks as good as it functions.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess off road rear bumpers were originally designed for trucks with campers. Extra storage and easy access to the spare tire are very important and aluminum rear bumper delivers. Now off road enthusiasts of all types are enjoying the benefits of Aluminess bumpers. With the option to carry over-sized spares, extra fuel, and watertight storage, there isnt an off roader that cant find a use for an rear bumpers.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Swing Arm Weight Limit: 150 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess off road rear bumpers were originally designed for trucks with campers. Extra storage and easy access to the spare tire are very important and aluminum rear bumper delivers. Now off road enthusiasts of all types are enjoying the benefits of Aluminess bumpers. With the option to carry over-sized spares, extra fuel, and watertight storage, there isnt an off roader that cant find a use for an rear bumpers.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess Bike Rack Swing Arm is designed to replace the existing box arm on your Aluminess rear bumper. The bike rack swing arm is able to hold 2 bikes and swing open with your Aluminess Box. The swing arm is designed to clear tires up to 35" in diameter and is available for most of existing rear bumpers. The swing arm is capable of holding 100 pounds on the upper platform and 100 pounds on the lower platform. Aluminess recommends the swing arm be installed with 1-UP USA bike rack trays. They are available for purchase from Aluminess with necessary hardware for easy installation. Other bike rack trays may work with platform, but have not been tested. Therefore, no warranty is available with other bike rack mounts.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Bike Rack Swing Arm Weight Limit: 200 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Storage is a premium when taking your family on long vacations, and if your Excursion has over-sized tires then you also have to compete with a tire that no longer fits underneath your vehicle. The solution is an Aluminess Rear Bumper. With 2 swing Arm to hold your spare tire and a storage box you will now have more room for the essentials inside your Excursion. In most cases any of the Aluminess boxes will work on the swing arm, so whether its extra fuel, a generator, or recovery gear that you need, your Aluminess Rear Bumper is there to save the day.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Swing Arm Weight Limit: 150 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Storage is a premium when taking your family on long vacations, and if your Excursion has over-sized tires then you also have to compete with a tire that no longer fits underneath your vehicle. In most cases any of the Aluminess boxes will work on the swing arm, so whether its extra fuel, a generator, or recovery gear that you need, your Aluminess Rear Bumper is there to save the day.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"

Vehicle Fitment 

Technical Files 

Installation Instructions

The Aluminess Bike Rack Swing Arm is designed to replace the existing box arm on your Aluminess rear bumper. The bike rack swing arm is able to hold 2 bikes and swing open with your Aluminess Box. The swing arm is designed to clear tires up to 35" in diameter and is available for most of existing rear bumpers. The swing arm is capable of holding 100 pounds on the upper platform and 100 pounds on the lower platform. Aluminess recommends the swing arm be installed with 1-UP USA bike rack trays. They are available for purchase from Aluminess with necessary hardware for easy installation. Other bike rack trays may work with platform, but have not been tested. Therefore, no warranty is available with other bike rack mounts.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Bike Rack Swing Arm Weight Limit: 200 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess designed the front winch bumper for the Chevy Express Van to look good and perform even better. The all-aluminum construction weighs just 85 pounds, so there is no need to worry about brakes, suspension, steering, and/or tires wearing out prematurely. Aluminum also doesn't rust, so your Aluminess bumper will hold up even in salty environments. The 2003-Current Chevy Express front bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don't run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don't want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8"pin. Whether you want to tackle the toughest trail or protect your rig against pesky wildlife, our bumper is sure to get the job done.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess designed the front winch bumper for the 2003-2019 Chevy Express Van to look good and perform even better. The all-aluminum construction weighs just 85 pounds, so there is no need to worry about brakes, suspension, steering, and/or tires wearing out prematurely. Aluminum also doesn't rust, so your Aluminess bumper will hold up even in salty environments. The 2003-Current Chevy Express front bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don't run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don't want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8"pin. Whether you want to tackle the toughest trail or protect your rig against pesky wildlife, our bumper is sure to get the job done.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess designed the front winch bumper for the Chevy Express Van to look good and perform even better. The all-aluminum construction weighs just 85 pounds, so there is no need to worry about brakes, suspension, steering, and/or tires wearing out prematurely. Aluminum also doesn't rust, so your Aluminess bumper will hold up even in salty environments. The 2003-Current Chevy Express front bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don't run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don't want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8"pin. Whether you want to tackle the toughest trail or protect your rig against pesky wildlife, our bumper is sure to get the job done.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess designed the front winch bumper for the 2003-2019 Chevy Express Van to look good and perform even better. The all-aluminum construction weighs just 85 pounds, so there is no need to worry about brakes, suspension, steering, and/or tires wearing out prematurely. Aluminum also doesn't rust, so your Aluminess bumper will hold up even in salty environments. The 2003-Current Chevy Express front bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don't run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don't want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8"pin. Whether you want to tackle the toughest trail or protect your rig against pesky wildlife, our bumper is sure to get the job done.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Storage is a premium when converting a van into your home away from home. If your van is a 44, then you also have to compete with a tire that no longer fits underneath your van. We kept this in mind when designing the rear bumper and the accessories that compliment it. With 2 swing Arm to hold your spare tire and a storage box, you will now have more room for the essentials to put inside your van. In most cases, any of the Aluminess boxes will work on the swing arm! Whether its extra fuel, a generator, or recovery gear that you need, your Aluminess rear bumper is there to help out.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 33"
• Swing Arm Weight Limit: 150 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Storage is a premium when converting a van into your home away from home. If your van is a 44, then you also have to compete with a tire that no longer fits underneath your van. We kept this in mind when designing the rear bumper and the accessories that compliment it.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 33"

Vehicle Fitment 

Technical Files 

Installation Instructions

The grill on Dodge Rams set it apart from every other truck on the road. It looks great, but it is also large and prone to damage if it were to have an encounter with wildlife. The Aluminess front winch bumper addresses this issue with full front end protection. Along with the front end protection, your Aluminess bumper is also winch compatible and has tow hooks built right in. The best part about the Aluminess winch bumper is that it only adds about 10 pounds over your factory bumper weight. This means no loss in performance from suspension, brakes, steering, or your tires.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

The grill on Dodge Rams set it apart from every other truck on the road. It looks great, but it is also large and prone to damage if it were to have an encounter with wildlife. The Aluminess front winch bumper addresses this issue with full front end protection. Along with the front end protection, your Aluminess bumper is also winch compatible and has tow hooks built right in. The best part about the Aluminess winch bumper is that it only adds about 10 pounds over your factory bumper weight. This means no loss in performance from suspension, brakes, steering, or your tires.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess rear bumpers were originally designed for trucks with campers. Extra storage and easy access to the spare tire are very important and the Aluminess rear bumper delivers. Now off-road enthusiasts of all types are enjoying the benefits of Aluminess rear bumpers. With the option to carry over-sized spares, extra fuel, and watertight storage, there isnt an off-roader that couldnt find a use for an Aluminess rear bumper.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"
• Swing Arm Weight Limit: 150 lb

Vehicle Fitment 

Technical Files 

Installation Instructions

Aluminess rear bumpers were originally designed for trucks with campers. Extra storage and easy access to the spare tire are very important and the Aluminess rear bumper delivers. Now off-road enthusiasts of all types are enjoying the benefits of Aluminess rear bumpers. With the option to carry over-sized spares, extra fuel, and watertight storage, there isnt an off-roader that couldnt find a use for an Aluminess rear bumper.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime

Specifications

• Position: Rear
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Step Included: No
• D-Rings Mount: No
• Sensor Cutouts: No
• Maximum Tire Size: 35"

Vehicle Fitment 

Technical Files 

Installation Instructions

Ford redesigned the grill on the 2008 and newer Econoline, which allowed Aluminess to make a sleeker looking bumper. The Aluminess off road front bumper sits tucked back underneath the vehicle to keep length down while still protecting the front-end and housing a winch. The all-aluminum construction weighs just 85 pounds, so there is no need to worry about brakes, suspension, steering, and tires wearing out prematurely. Aluminum also doesn't rust, so your Aluminess bumper will hold up even in salty environments. The 2008-2014 Ford Econoline off road front bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don't run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don't want cluttering up your van. We build shackle mounts into all of our front bumpers to accept a shackle with 7/8"pin. Whether you want to tackle the toughest trail or protect your rig against pesky wildlife, an Aluminess Bumper is sure to get the job done.

Features

• Fabricated on state-of-the-art equipment
• Built extremely tough to last a lifetime
• All front winch bumpers now have vents and the Aluminess "A" cut into the front
• Standard bumper configuration is 1.5" brush guard

Specifications

• Position: Front
• Bumper Type: Light Duty
• Color/Finish: Black Powder Coat
• Material: Aluminum
• Winch Compatible: Yes
• D-Rings Mount: Yes
• Sensor Cutouts: No

Vehicle Fitment 

Technical Files 

Installation Instructions