Expedition One JL18-CS2-RB-STC-PC Core Series 2 Rear Bumper with Smooth Motion Tire Carrier System for Jeep Wrangler JL 2018-2022 - Textured Black Powder Coat
Part Number: JL18-CS2-RB-STC-PC
Product Type: Rear Bumper
Vehicle Fitment: Jeep Wrangler JL 2018-2022
Note 1: Sensor holes are included however they are not guaranteed to work. Depending on your take-off stock bumper you may need to purchase sensor parts from your local dealership
Note 2: Sensor model numbers: 6MH85RX-FAB-BEZEL-PAR, 6MH84RX-FAB-BEZEL-PAR, 6MH83RX-FAB-BEZEL-PAR, 6MH82RX-FAB-BEZEL-PAR
Note 3: A narrow wheel with an extreme positive offset and a very wide tire may not work with the standard tire mount
Core series 2 rear bumper with smooth motion tire carrier system is the ultimate in protection and flexibility when running larger tire sizes. Implementing a slimmer corner bumper design to maximize articulation with large off-road tires and provide compatibility with aftermarket fender flares.
- Constructed of high-grade precision cut 3/16" steel
- Swing arm capable of holding up to a 40" tire
- Soft lock-out feature keeps your tire carrier arm in place when enabled
- 1" thick 3/4" recovery shackle mounts (optional screw pin shackles purchased separate)
- Includes license plate bracket and license plate light
- Includes rear back-up sensor holes replacing a plastic OEM bumper will require that you purchase factory bezels see info below
- Works with OEM blind spot monitor systems and parking sensors (see additional info below)
- Designed to utilize the stock receiver hitch
- Hi-lift jack points
- Designed and made in U.S.A
- Geri can mount bracket
- CB antenna mount
- Horizontal hi-lift jack mount
- Vertical hi-lift jack mount
- Hi-lift/pullpal combo mount
The soft lockout mechanism on the swing arm enables the arm to be in a soft-lock position when opened. This keeps your door from swinging closed on you, but still allows some play in the door. To close the door after the soft lockout is engaged the door must be fully opened and then use the latch seen in picture 4 to disengage the lockout.
- Product Line: Core Series 2
- Position: Rear
- Color/Finish: Textured Black Powder Coat
- Material: Steel
- D-Rings Mounts: Yes
- Sensor Cutouts: Yes
- Winch Compatible: Yes
- Step Included: Yes
- Light Mount: Yes
- Weight: 100 lb
How will this product be delivered?This product is oversized and will be delivered via Truck Freight. This product does NOT ship via FedEx or UPS ground.
What is Truck Freight shipping?It's just that. The item is loaded on a pallet or into a secure shipping box, wrapped tightly and loaded on box truck or semi-truck and delivered to your location.
What is a box Truck?A Box Truck is smaller than a semi-truck but large enough to deliver goods. A good comparison is a truck that's used to deliver a couch or refrigerator.
Do I need to be available to receive the product?Yes. It's just like having a refrigerator or washer/dryer delivered to your house. The driver will unload the product in your driveway or as close to your house as they can get.
Should I have this product delivered to a shop or installer?It depends! If you think you can install the product on your vehicle, then shipping to your house is ok. Keep in mind, these bumpers are very heavy. Most bumpers weight between 85 and 350 pounds. You will need help. It's always preferred to ship to an installer who will have a fork lift to unload the product.
Do you charge shipping on orders?The cost to ship a bumper has more than tripled from 2019 to 2023. Our goal is to be as transparent with you as we can. In 2019, the average cost to ship a bumper was $150. In 2023, the average cost to ship a bumper is $375. This means we're making significantly less money and still providing the same quality service.
How long will it take to receive my orderThe availability of each product is listed on the product page. In general, these are accurate and based off our warehouse availability or manufacturer lead time.
Why should I purchase from you versus directly with the manufacturer?Great question! This answer applies to "Built to order" parts that we don't have in-stock. You're going to save both time and money. We have great relationships with each manufacturer that we carry. So in general you're working with an extension of their company. Our prices are generally cheaper and we have processes to check on your "Built to Order" item based on lead times they provide. There's little need for you to call us. We'll make sure you're informed when your order is built and ready to ship.
How do returns work on oversized products like bumpers?Returns are rare but they do happen. Our return rate is less than 2%, meaning we have a 98% customer success rate! We accept returns on damaged items with a valid Return Authorization Number or a RMA number. We will refund the full amount minus the shipping costs for the return and a 20% restocking fee. Please email us at [email protected] with your order number and a photo of the item’s condition. Our goal is to work toward a satisfactory solution.
- Expedition One
- Item is built to order. Lead time is 6-8 months.
- Item Requires Shipping
- 1.0 lbs.
- W1.0000” x H1.0000” x L1.0000”
- Flat Rate Shipping
Total Reviews (0)
You must login to post a review.
Write the First Review!