DV8 Offroad RBTT1-04 MTO Series Rear Bumper for Toyota Tacoma 2016-2023
Part Number: RBTT1-04
Product Type: Rear Bumper
Vehicle Fitment: Toyota Tacoma 2016-2023
Note 1: Compatible with factory hitch and factory sensors
Note 2: Utilizes factory license plate mounts and lights
Note 3: Not compatible with blind spot module
Low profile MTO Series Tacoma rear bumper was designed as a direct replacement to the factory bumper, with no cutting or modification required for installation. It brings the addition of 2 reinforced clevis mounts that take ¾" D-rings, providing you with recovery options. A 3-inch light pod can be mounted behind the aluminum mesh panels towards each end of the bumper. These panels can be removed and painted, or left in their raw aluminum color.
At each corner of the bumper is a side step, as well as a step at the middle of the bumper, giving you multiple options to hop up and access the cargo in your truck bed. Bumper is compatible with factory rear parking sensors and retains full functionality. The blind spot detection module does not function with this bumper.
Integrated Side Steps: The MTO Series Toyota Tacoma rear bumper features a central step, and two side steps at the corners of the bumper.
Compatible With Factory Back-Up Sensors: Sensor cutouts allow you to retain full functionality of your OEM backup sensor system. If your model has no factory sensors, provide plugs for the sensor cutouts.
Mounts For Two 3" LED Light Pods: Behind the two aluminum mesh panels are 3" pod light mounts to supplement your lighting.
Recovery Options With Two ¾" D-Ring Mounts: There are two clevis mounts that can fit ¾-inch D-rings to provide recovery options at the rear of your truck, just in case you need them.
- Side steps at the corners and center of the bumper
- Light mounts for two 3" light pods
- Paintable aluminum mesh panels
- Retains OEM license plate mounts and lights
- Two ¾" D-ring mounts
- Retains factory backup sensors functionality
- Compatible with or without factory hitch and trailer plug
- DV8 Offroad Elite Series 3" Cube Light p/n BE3EW40W
- DV8 Offroad LED wiring harness p/n WIRE HARNESS
- Product Line: MTO Series
- Color/Finish: Micro-Textured Black Powder Coat
- Position: Rear
- Material: 3.5mm Plate Steel and 5mm Steel Supports
- Sensor Cutouts: Yes
- D-Rings Mount: Yes
- D-Rings Included: No
- Winch Compatible: Yes
- Step Included: Yes
- Light Mount: Yes
- Blind Spot Module Compatible: No
- Length: 71"
- Width: 12"
- Height: 12"
- Weight: 71 lb
How will this product be delivered?This product is oversized and will be delivered via Truck Freight. This product does NOT ship via FedEx or UPS ground.
What is Truck Freight shipping?It's just that. The item is loaded on a pallet or into a secure shipping box, wrapped tightly and loaded on box truck or semi-truck and delivered to your location.
What is a box Truck?A Box Truck is smaller than a semi-truck but large enough to deliver goods. A good comparison is a truck that's used to deliver a couch or refrigerator.
Do I need to be available to receive the product?Yes. It's just like having a refrigerator or washer/dryer delivered to your house. The driver will unload the product in your driveway or as close to your house as they can get.
Should I have this product delivered to a shop or installer?It depends! If you think you can install the product on your vehicle, then shipping to your house is ok. Keep in mind, these bumpers are very heavy. Most bumpers weight between 85 and 350 pounds. You will need help. It's always preferred to ship to an installer who will have a fork lift to unload the product.
Do you charge shipping on orders?The cost to ship a bumper has more than tripled from 2019 to 2023. Our goal is to be as transparent with you as we can. In 2019, the average cost to ship a bumper was $150. In 2023, the average cost to ship a bumper is $375. This means we're making significantly less money and still providing the same quality service.
How long will it take to receive my orderThe availability of each product is listed on the product page. In general, these are accurate and based off our warehouse availability or manufacturer lead time.
Why should I purchase from you versus directly with the manufacturer?Great question! This answer applies to "Built to order" parts that we don't have in-stock. You're going to save both time and money. We have great relationships with each manufacturer that we carry. So in general you're working with an extension of their company. Our prices are generally cheaper and we have processes to check on your "Built to Order" item based on lead times they provide. There's little need for you to call us. We'll make sure you're informed when your order is built and ready to ship.
How do returns work on oversized products like bumpers?Returns are rare but they do happen. Our return rate is less than 2%, meaning we have a 98% customer success rate! We accept returns on damaged items with a valid Return Authorization Number or a RMA number. We will refund the full amount minus the shipping costs for the return and a 20% restocking fee. Please email us at [email protected] with your order number and a photo of the item’s condition. Our goal is to work toward a satisfactory solution.
- DV8 Offroad
- Item Requires Shipping
- 71.0 lbs.
- W12.0000” x H12.0000” x L71.0000”
- Free Shipping!
- Free Shipping!
Total Reviews (0)
You must login to post a review.
Write the First Review!