DV8 Offroad FBTT1-04 MTO Series Front Bumper for Toyota Tacoma 2016-2023
Part Number: FBTT1-04
Product Type: Front Bumper
Vehicle Fitment: Toyota Tacoma 2016-2023
Note 1: Does not fit with the TRD skid plate. However, Tacoma front skid plate is compatible with this bumper. The MTO bumper fits all other Tacoma trim factory skid plates
Note 2: Requires cutting of front end
Note 3: Compatible with DV8 Offroad skid plate (p/n SPTT1-01)
High clearance MTO Series Tacoma front bumper was designed to provide protection while driving off-road, and also increases your ground clearance and approach angle. The integrated bumper skid protects the Tacoma's front underbelly, which can be further enhanced with Tacoma front skid plate. The bumper wings are tapered to provide superior clearance, and feature a mount for a 3" light pod on either side. Additionally, a 20" dual row LED light bar can be mounted behind the central mesh panels for even more trail lighting.
Two heavily reinforced clevis mounts that take ¾" D-ring shackles sit towards the center of the bumper. The aluminum mesh panels can be removed and painted, or left as is. The bumper is constructed from 3.5mm steel plates with 5mm supports, and then finished in a Micro-texture black powder coat to prevent rust. All necessary hardware is included, and installation instructions can be found below.
3" Light Pod Mounts: On each of the bumper wings are 3" pod light mounting points so you can light up the trail.
Integrated Bumper Skid Plate: A skid plate is integrated underneath the bumper to provide further protection from large rocks and other obstacles off-road.
Dual D-Ring Shackle Mounts: Towards either side of the bumper are clevis mounts that can take ¾" D-rings to provide recovery options on the trail.
Hidden 20" Dual Row Light Bar Mount: A 20" dual row LED light bar can be mounted behind the central mesh panels, increasing visibility in low-light conditions.
- Low profile full-width Tacoma bumper
- Fits two 3" LED light pods
- 20" light bar mount behind mesh panels
- Two clevis mounts for D-rings
- Paintable aluminum mesh panels
- 3-piece construction
- Cutting is required for fitment
Bolt On Skid Plate
- DV8 Offroad front skid plate p/n SPTT1-01
- DV8 Offroad Elite Series 3" cube light p/n BE3EW40W
- DV8 Offroad Elite Series 20" LED light bar p/n BE20EW200W
- DV8 Offroad Elite Series 20" low profile light bar p/n BE20SW105W
- DV8 Offroad wiring harness p/n WIRE HARNESS
- Product Line: MTO Series
- Color/Finish: Micro-Textured Black Powder Coat
- Position: Front
- Material: 3.5mm Plate Steel and 5mm Steel Supports
- Sensor Cutouts: No
- D-Rings Mount: Yes
- D-Rings Included: No
- Winch Compatible: Yes
- Light Mount: Yes
- Length: 46"
- Width: 20"
- Height: 14"
- Weight: 95 lb
How will this product be delivered?This product is oversized and will be delivered via Truck Freight. This product does NOT ship via FedEx or UPS ground.
What is Truck Freight shipping?It's just that. The item is loaded on a pallet or into a secure shipping box, wrapped tightly and loaded on box truck or semi-truck and delivered to your location.
What is a box Truck?A Box Truck is smaller than a semi-truck but large enough to deliver goods. A good comparison is a truck that's used to deliver a couch or refrigerator.
Do I need to be available to receive the product?Yes. It's just like having a refrigerator or washer/dryer delivered to your house. The driver will unload the product in your driveway or as close to your house as they can get.
Should I have this product delivered to a shop or installer?It depends! If you think you can install the product on your vehicle, then shipping to your house is ok. Keep in mind, these bumpers are very heavy. Most bumpers weight between 85 and 350 pounds. You will need help. It's always preferred to ship to an installer who will have a fork lift to unload the product.
Do you charge shipping on orders?The cost to ship a bumper has more than tripled from 2019 to 2023. Our goal is to be as transparent with you as we can. In 2019, the average cost to ship a bumper was $150. In 2023, the average cost to ship a bumper is $375. This means we're making significantly less money and still providing the same quality service.
How long will it take to receive my orderThe availability of each product is listed on the product page. In general, these are accurate and based off our warehouse availability or manufacturer lead time.
Why should I purchase from you versus directly with the manufacturer?Great question! This answer applies to "Built to order" parts that we don't have in-stock. You're going to save both time and money. We have great relationships with each manufacturer that we carry. So in general you're working with an extension of their company. Our prices are generally cheaper and we have processes to check on your "Built to Order" item based on lead times they provide. There's little need for you to call us. We'll make sure you're informed when your order is built and ready to ship.
How do returns work on oversized products like bumpers?Returns are rare but they do happen. Our return rate is less than 2%, meaning we have a 98% customer success rate! We accept returns on damaged items with a valid Return Authorization Number or a RMA number. We will refund the full amount minus the shipping costs for the return and a 20% restocking fee. Please email us at [email protected] with your order number and a photo of the item’s condition. Our goal is to work toward a satisfactory solution.
- DV8 Offroad
- Item Requires Shipping
- 95.0 lbs.
- W20.0000” x H14.0000” x L46.0000”
- Free Shipping!
- Free Shipping!
Total Reviews (0)
You must login to post a review.
Write the First Review!