DV8 Offroad RBBR-02 FS-15 Series Rear Bumper for Ford Bronco 2021-2023
Part Number: RBBR-02
Product Type: Rear Bumper
Vehicle Fitment: Ford Bronco 2021-2023
Note: This works great with any of DV8 front bumper options, but it was designed to perfectly match the style of FS-15 Series Bronco front bumper
The FS-15 Series Bronco rear bumper was designed to maximize ground clearance when taking your Bronco off-road. It provides superior rear-end protection while closely following the factory body style and contours. The license plate mount is located above the bumper and includes an LED plate light. Up to a 37" spare tire mounted on the OEM carrier will fit above the bumper. To keep full visibility of the third brake light with a 37" spare, use third brake light extension.
Two 3" flush mount pod lights can be installed towards either side of the bumper to provide supplemental trail lighting. Alternatively, they can be wired together and work in tandem with your reverse lights. Two reinforced clevis mounts that take ¾-inch D-ring shackles provide recovery options during your off-road adventures.
High clearance Bronco bumper is constructed of 3.5mm steel plating with 5mm steel supports, and then finished in a finely textured black powder coat to protect against rust.
High Clearance Fitment: The bumper's mid-section sits at a higher level than the OEM bumper, and the tapered wings provide ample room for the Bronco to navigate obstacles on the trail.
Retains Parking Sensors: Sensor cut-outs allow you to install and retain full functionality of the factory rear parking sensors.
Two Flush Pod Light Mounts: Two 3" flush mounted pod lights can be installed in the bumper cutouts, and can function as supplemental trail lighting or reverse lights.
License Plate Mount With LED Light: The license plate mount was placed above the bumper and to the side of the swinging tailgate to maintain a higher clearance from obstacles. There is an included LED plate light that can be wired into the factory license plate light harness.
- Higher than factory ground clearance
- 3.5mm steel plates with 5mm steel supports
- Accepts two, 3" flush mount led pod lights
- Dual clevis mounts for ¾" d-ring shackles
- Retains factory backup sensors
- Accommodates up to 37" spare tire
- Compatible with factory tow hitch
- Product Line: FS-15 Series
- Color/Finish: Micro-Textured Black Powder Coat
- Position: Rear
- Material: 3mm/5mm Steel
- Sensor Cutouts: Yes
- D-Rings Mount: Yes
- D-Rings Included: No
- Lights Included: No
- Hardware Included: Yes
- Winch Compatible: Yes
- Light Mount: Yes
- Step Included: Yes
- Install Time: ?2.5hrs
- Weight: ? 76 lb
Alternative Popular Products Include:
How will this product be delivered?This product is oversized and will be delivered via Truck Freight. This product does NOT ship via FedEx or UPS ground.
What is Truck Freight shipping?It's just that. The item is loaded on a pallet or into a secure shipping box, wrapped tightly and loaded on box truck or semi-truck and delivered to your location.
What is a box Truck?A Box Truck is smaller than a semi-truck but large enough to deliver goods. A good comparison is a truck that's used to deliver a couch or refrigerator.
Do I need to be available to receive the product?Yes. It's just like having a refrigerator or washer/dryer delivered to your house. The driver will unload the product in your driveway or as close to your house as they can get.
Should I have this product delivered to a shop or installer?It depends! If you think you can install the product on your vehicle, then shipping to your house is ok. Keep in mind, these bumpers are very heavy. Most bumpers weight between 85 and 350 pounds. You will need help. It's always preferred to ship to an installer who will have a fork lift to unload the product.
Do you charge shipping on orders?The cost to ship a bumper has more than tripled from 2019 to 2023. Our goal is to be as transparent with you as we can. In 2019, the average cost to ship a bumper was $150. In 2023, the average cost to ship a bumper is $375. This means we're making significantly less money and still providing the same quality service.
How long will it take to receive my orderThe availability of each product is listed on the product page. In general, these are accurate and based off our warehouse availability or manufacturer lead time.
Why should I purchase from you versus directly with the manufacturer?Great question! This answer applies to "Built to order" parts that we don't have in-stock. You're going to save both time and money. We have great relationships with each manufacturer that we carry. So in general you're working with an extension of their company. Our prices are generally cheaper and we have processes to check on your "Built to Order" item based on lead times they provide. There's little need for you to call us. We'll make sure you're informed when your order is built and ready to ship.
How do returns work on oversized products like bumpers?Returns are rare but they do happen. Our return rate is less than 2%, meaning we have a 98% customer success rate! We accept returns on damaged items with a valid Return Authorization Number or a RMA number. We will refund the full amount minus the shipping costs for the return and a 20% restocking fee. Please email us at [email protected] with your order number and a photo of the item’s condition. Our goal is to work toward a satisfactory solution.
- Item Requires Shipping
- 78.0 lbs.
- W16.0000” x H12.0000” x L71.0000”
- Free Shipping!
- Free Shipping!
Total Reviews (0)
Write the First Review!
You must login to post a review.